Cabot Exterior Stains (25)

Cabot Transparent Cedar Oil Deck and Siding Stain 1 gal. • Benefits • • Description • • Specification • • Keep the natural beauty of the wood and wood grain while protecting it from the elements leaving a flat, clear cedar tone • Deep Penetrating waterproofer • Dual Action UV protection • Mildew & Algae resistant coating Coverage: Approximately 100-250 sq. ft. (9.3-23.2 m2) per gallon. Cabot® Wood Toned Stain & Sealer Low VOC is made with a particular combination of resin and oil to give bare wood a superb, natural finish. Cabot Wood Toned Stain is easy to apply and gently darkens wood when initially applied, leaving a flat, translucent-toned finish that weathers to a natural wood color over time. Only for decks, siding, fences, and trim made of new or refurbished external wood. Also works well on shingles, shakes, and log cabins. Where to Apply Cabot Clear Wood Protector is ideal for use on new or refinished wood decks, porches, outdoor furniture, steps, and railings. Stone, masonry, brick, and concrete are also acceptable. Preparing your surface Check for dirt, mildew stains, loose wood fibers, and other foreign substances on the surface. The substance must be able to permeate in order to be effective. Surfaces must be stable and dry or wet. If the wood is moist, it should be clear of puddles and not feel damp. Cabot® Wood Cleaner, Wood Brightener, or Wood Strippers can be used to clean previously discolored or aged surfaces. Scrubbing with a firm bristle brush or sanding may be necessary to remove all loose wood fibers from untreated aged surfaces. Application Brushes, stain pads, a low-pressure garden sprayer, or professional spray equipment can be used. Always quickly back-brush after spraying. Always complete a small test area before proceeding to guarantee the correct look and drying time. Before and during use, vigorously shake and whisk. If the project calls for more than one container, mix them all together to maintain consistency. Depending on exposure, reapply every 1-2 years. When standing or walking on surfaces that are still damp after applying Cabot Clear Wood Protector, exercise caution since the surface may be slippery. Cleanup and Disposal Clean brushes and equipment with soap and water. Dispose of empty cans or unused portion in accordance with local, state and federal regulations. Brand Name: Cabot Sub Brand: Wood Toned Stain & Sealer Low VOC Transparency: Transparent Tintable: No Color: Cedar Base Type: Oil-Based Product Type: Deck and Siding Stain Container Size: 1 gal UV Resistant: No Durability: 3 Years Application Method: Brush/Sprayer Water Repellent: Yes VOC Level: 250 g/L Sealer: Yes Coverage Area: 250-350 sq ft Recommended Surface: Deck/Siding Full Cure Time: 24 hr Color Family: Brown Clean Up: Soap and Water Safety Data Sheet Here

Cabot Australian Timber Oil Exterior Stain Natural • Benefits • • Description • • Specification • ✔️ UV Absorbing Surface ✔️ Rich Color brings out the Natural Beauty Of Wood ✔️ Resists scuffing and scraping   Cabot Australian timber oil for decks, siding, railings, and outdoor furniture is a special blend of oils designed to protect dense tallow wood, cambara, and merbau from the harsh Australian elements. To enhance natural wood depth and patina, Australian timber oil penetrates deep into dense, resin-rich woods. Australian timber oil provides three-way oil protection as well as a beautiful hardwood stain. It contains a precise blend of superb-grade linseed oil for maximum penetration, long-oil alkyds for durability, and pure South American Tung oil for color depth and water repellency. Complex translucent iron oxide pigments are also used to create a long-lasting UV-absorbing surface that is rich in color and dimension. After years of research and development, the result is an advanced-technology treatment with unrivaled performance that is designed to protect. Brand Name: Cabot Transparency: Transparent Tintable: No Color: Natural Base Type: Oil-Based Coating Material: Alkyd Product Type: Australian Timber Oil Container Size: 1 gal. Application Method: Brush/Sprayer Full Cure Time: 30 day Water Repellent: Yes Coverage Area: 400-600 sq. ft. Time Before Recoating: 48 hr. Sealer: Yes VOC Level: 550 g/L UV Resistant: Yes Recommended Surface: Decks/Outdoor Furniture/Railings/Siding Durability: 1-4 Years

Cabot Semi-Solid Tintable Deep Base Water-Based Acrylic Stain 1 gal. Benefits ✔️ Rich Colors  ✔️ Deep Penetrating into Wood ✔️ 100% Acrylic Resin-Based Description Cabot Semi-Solid Acrylic Stains are richly pigmented, penetrating, 100 percent acrylic resin-based stains that are unique to Cabot. They provide greater hiding power and color than semitransparent stains, yet their attractive flat finish highlights the natural beauty of the wood’s texture. These stains are environmentally friendly and equipment is easily cleaned with soap and water. Cabot Semi-Solid Acrylic Stains provide long-lasting, vapor-permeable protection that beautifies and enriches exterior wood surfaces. Containing a special acrylic resin, these products are ideal for all types of natural wood siding and shingles. Exceptional ultraviolet protection is achieved through the use of nonfade, earth tone pigments, in addition to the superior acrylic resin. Semi-Solid Acrylic Stains are formulated to weather slowly over time without cracking, peeling, or blistering. Specification Brand Name: Cabot Transparency: Semi-Solid Tintable: Yes Color: Deep Base Base Type: Water-Based Coating Material: Acrylic Product Type: Stain Container Size: 1 gal. Full Cure Time: 30 day Sealer: Yes Application Method: Brush/Pad/Spray Recommended Surface: Finished Wood Durability: 10 Years year Coverage Area: 100-300 sq. ft. Water Repellent: Yes VOC Level: 100 g/L UV Resistant: Yes

Cabot Crystal Clear Water-Based Waterproofer Wood Protector 1 gal. • Benefits • • Description • • Specification • ✔️ Long-lasting repellency ✔️ Penetrates & fills pores ✔️ Premium-grade, simple-to-use, silicone sealer ✔️ Clean up with soap & water ✔️ For wood, concrete, brick, masonry, etc. Cabot Waterproofing with surface protector is an advanced-technology, water-based silicone coating. This one-of-a-kind formulation is designed to provide unsurpassed waterproofing protection to a multitude of surfaces by coating the pores of the substrate with silicone. Brand Name: Cabot Sheen: Flat Color: Crystal Clear Base Type: Silicone Product Type: Waterproofing Sealer Container Size: 1 gal Indoor or Outdoor: Outdoor Full Cure Time: 1 hr Time Before Recoating: 1 day Color Family: Clear VOC Level: 100 g/L Paintable: Yes Coverage Area: 250 sq ft

Cabot Problem-Solver White Acrylic Primer 1 gal. • Benefits • • Description • • Specification • ✔️ Maximum performance and fast drying ✔️ Ideal for exterior base coats ✔️ Problem-Solver Primer yields outstanding results on siding, shingles, plywood and both smooth- and rough-sawn surfaces Cabot Problem-Solver Primer provides maximum performance through a faster-drying and higher-hiding formulation. An ideal exterior base coat for all types of solid stains and paints, it provides superior resistance to extractive bleeding and moisture problems. The 100 percent alkyd, oil-based formula dries in a fraction of the time compared to traditional linseed oil-based primers and both formulas facilitate the application of a quality finish coat within just a few hours. Problem-Solver Primer yields outstanding results on siding, shingles, plywood and both smooth- and rough-sawn surfaces. It is also suited for application over previously oil-based stained or painted surfaces. Brand Name: Cabot Sub Brand: Problem-Solver Color: White Coating Material: Acrylic Product Type: Primer Container Size: 1 gal. Indoor or Outdoor: Outdoor Full Cure Time: 8 hr. Stain Blocking: No Time Before Recoating: 8 hr. VOC Level: 100 g/L Clean Up: Soap and Water Tintable: Yes Coverage Area: 150-500 sq. ft. Recommended Surface: Wood Idea for use on siding, trim and decks *Locks in tannin bleed to block unsightly discoloration *High hiding *Faster drying *Exterior base coat for all types of solid stains and paints *Superior resistance to extractive bleeding and moisture problems

Cabot Australian Timber Oil Exterior Stain Mahogany Flame • Benefits • • Description • • Specification • • Protection: The stain is made to shield your deck from the elements, including moisture, rain, and sunlight, which can eventually cause fading and warping. • Color Enhancement: The Mahogany Flame stain color can bring out the wood's inherent beauty and give your deck a rich, inviting appearance. • Durability: The stain is made with premium oils that soak deeply into the fibers of the wood, offering protection and durability that lasts for a very long time. • Mold and mildew Resistant: The stain is made with mold inhibitors to help stop the formation of mold and mildew on the surface of the wood, preserving the cleanliness and freshness of your deck for a longer period of time. • Easy to Apply: The stain may be applied easily with a brush, roller, or sprayer and dries quickly, enabling the application of numerous coats in a single day. • Water-Repellent: The stain has a water-repellent quality that helps shield the wood from water damage and prolongs the life of the surface. • UV Protection: The stain has UV protection, which helps keep the wood from becoming bleached by the sun and turning gray over time. Are you searching for a premium deck stain to preserve and enhance the beauty of your wood deck? Cabot Australian Timber Oil Exterior Stain Mahogany Flame is the only option. For long-lasting protection and durability, this premium stain is precisely blended with premium oils that reach deep into the wood fibers. It shields your deck from the sun, rain, and dampness in addition to enhancing the wood's natural beauty with its warm and rich Mahogany Flame color. As a result of the stain's resistance to mold and mildew, your deck will continue to look fresher and cleaner for a longer period of time. For your deck, don't accept anything less than the best. Make your deck last for years to come with Cabot Australian Timber Oil Exterior Stain Mahogany Flame's long-lasting protection and gorgeous, rich color. Available Locally at Gilford Hardware and Outdoor Power Equipment Brand Name: Cabot Transparency: Transparent Tintable: No Color: Mahogany Flame Base Type: Oil-Based Coating Material: Alkyd Product Type: Australian Timber Oil Container Size: 1 gal. Durability: 1-4 Years Recommended Surface: Decks/Outdoor Furniture/Railings/Siding UV Resistant: Yes Application Method: Brush/Sprayer Coverage Area: 400-600 sq. ft. VOC Level: 550 g/L Time Before Recoating: 48 hr. Sealer: Yes Water Repellent: Yes

Cabot Australian Timber Oil Exterior Stain Jarrah Brown • Benefits • • Description • • Specification • ✔️ UV Protection from Fading / Peeling ✔️ Oil Based ✔️ Rich Color brings out the natural beauty of wood   Cabot Australian Timber Oil for decks, siding, railings and outdoor furniture is a unique blend of oils originally formulated to protect dense tallowwood, cambara and merbau from extreme Australian exposures. Australian Timber Oil penetrates deep into the dense, resin-rich woods to accentuate natural wood depth and patina. Containing a precise blend of superb-grade linseed oil for maximum penetration, long-oil alkyds for durability and pure South American Tung oil for color depth and water repellency, Australian Timber Oil delivers three-way oil protection and a beautiful hardwood stain. In addition, complex translucent iron oxide pigments are added to ensure a lasting UV absorbing surface rich with color and dimension. The result after years of development is an advanced-technology treatment of unrivaled performance designed to protect your exotic wood surfaces like never before. Brand Name: Cabot Transparency: Transparent Tintable: No Color: Jarrah Brown Base Type: Oil-Based Coating Material: Natural Oil/Waterborne Hybrid Product Type: Australian Timber Oil Container Size: 1 gal. Durability: 4 Years Recommended Surface: Decks/Outdoor Furniture/Railings/Siding Full Cure Time: 30 day VOC Level: 275 g/L Water Repellent: Yes Application Method: Brush/Sprayer Sealer: Yes UV Resistant: Yes Coverage Area: 250-350 sq. ft.

Cabot Australian Timber Oil Exterior Stain Amberwood • Benefits • • Description • • Specification • ✔️ Brings out Natural Beauty of Wood & Protects the Grain ✔️ Rich Color ✔️ UV Protected prevents fading

Cabot Australian Timber Oil Exterior Stain Honey Teak • Benefits • • Description • • Specification • ✔️ UV Absorbing Surface ✔️ Rich Color brings out Natural Beauty Of Wood ✔️ Resists scuffing and scraping   Cabot Australian timber oil for decks, siding, railings and outdoor furniture is a unique blend of oils originally formulated to protect dense tallow wood, cambara and merbau from the extreme Australian exposures. Australian timber oil penetrates deep into the dense, resin-rich woods to accentuate natural wood depth and patina. Containing a precise blend of superb-grade linseed oil for maximum penetration, long-oil alkyds for durability and pure South American Tung oil for color depth and water repellency, Australian timber oil delivers three-way oil protection and a beautiful hardwood stain. In addition, complex translucent iron oxide pigments are added to ensure a lasting U.V absorbing surface rich with color and dimension. The result after years of development is an advanced-technology treatment of unrivaled performance designed to protect your exotic wood surfaces like never before. Brand Name: Cabot Transparency: Transparent Tintable: No Color: Honey Teak Base Type: Oil-Based Coating Material: Natural Oil/Waterborne Hybrid Product Type: Australian Timber Oil Container Size: 1 qt. Recommended Surface: Decks/Outdoor Furniture/Railings/Siding VOC Level: 550 g/L Coverage Area: 62.5-87.5 sq. ft. Full Cure Time: 30 day UV Resistant: Yes Sealer: Yes Durability: 1-4 Years Water Repellent: Yes Application Method: Brush/Sprayer

Cabot Deck Stain Solid Tintable Water-Based Acrylic • Benefits • • Description • • Specification • ✔ Richly pigmented for extra UV protection ✔ Ideal for decks, fencing, and patios ✔ The scuff-resistant finish made to be walked on ✔ Acrylic #1800 series requires two-coat application ✔ Oil series #1600 and #7600 recommend the one-coat application ✔ Not recommended for siding or incense cedar ✔ Unlimited color matching ✔ Do not thin ✔ Not intended for interior surfaces Approximately 150-250 square feet per gallon Solid Color Decking Stains are ideal for use on most types of lumber including redwood, cypress, pine, and fir, as well as pressure-treated wood. Cabot® Solid Color Decking Stains are extremely durable exterior stains for use on all wood decking, outdoor furniture, and fencing, as well as cement patios and walkways. Series #1800, 100% acrylic finish is also water repellent and fades resistant. Solid Color Stains provide excellent adhesion to new, previously stained or painted surfaces, which are in a clean, sound condition. Brand Name: Jonathan Green Sub Brand: Fast Grow Grass Type: Mixed Sunlight Required: Sun/Partial Shade Product Type: Grass Seed Container Size: 7 lb. Packaging Type: Bagged Drought Tolerant: Yes       Coverage Area: 3500 sq. ft. 65% Annual Ryegrass, 15% Perennial Ryegrass, 10% Tall Fescue, 10% Creeping Red Fescue 🎨 View Cabot Solid Stain Color Chart 🎨