☆ CALL:1-603-524-5366
☆ EMAIL:contact@gilfordhardware.com
☆ VISIT US:64 Gilford E Dr Gilford
*BEFORE STARTING THE HONDA EU2200i GENERATOR MOVE IT OUTSIDE IN A WELL VENTILATED AREA*
Unscrew and Remove gas fill cap and fill Honda EU2200i Portable Generator. ( .95 Gallons )
Use unleaded gasoline with a pump octane rating of 86 or higher.
Next, on the left side of the EU2200i, Use a flat head screwdriver, or coin to remove the black screw (highlighted inside the circle)
This will allow you to remove the panel, and add oil. (Oil fill area is located right above the arrow)
Use dipstick to verify Oil level.
The Engine ON/OFF and Fuel switch is located toward the front left side of the EU2200i. Simply rotate the switch into the "On" Position"
The Honda EU2200i's choke is located on the left side of the machine. When starting the Honda EU2200i for the first time, flip the choke switch to the right.
The Honda EU2200i's recoil start is located on the left side of the machine. It's now time to start the generator. Pull the recoil starter until the engine turns over.
*NOTE: The very first start of an EU2200i Generator might take multiple pulls. This is normal, and expected.*
Finally, Turn the Honda EU2200i's choke to the off position!