Minwax Polyurethane Oil Fast Drying Clear Semi-Gloss  0.5 pt. | Gilford Hardware
Minwax® Minwax Polyurethane Oil Fast Drying Clear Semi-Gloss 0.5 pt. $8.59 $9.99
Minwax Polyurethane Oil Fast Drying Clear Semi-Gloss  0.5 pt. • Benefits • • Description • • Specification • ✔Gives any indoor wood surface long-lasting beauty and protection. ✔ One of the most long-lasting wood protection treatments. ✔ Woodwork, furniture, doors, cabinets, and floors are all great spots to use Minwax Polyurethane Oil ✔ Both finished and untreated wood can be used.   Minwax® Polyurethane Wood Finish will protect and enhance the beauty of your interior wood projects. This oil-based clear sealer protects woodwork, furniture, doors, cabinets, and floors while adding long-lasting beauty. It is a transparent coat that is one of the most durable coatings for wood protection against scratches, spills, and other hazards. It comes in a variety of sheens and can be used on both completed and unfinished wood projects. Recoats can be done in as little as 4-6 hours because to the fast-drying process. Brand Name: Minwax Sub Brand: Fast-Drying Polyurethane Sheen: Semi-Gloss Color: Clear Base Type: Oil-Based Product Type: Fast-Drying Polyurethane Container Size: 0.5 pt Time Before Recoating: 6 hr UV Resistant: No Coverage Area: 30 sq ft Full Cure Time: 24 hr Indoor or Outdoor: Indoor Color Family: Clear
Minwax Gel Stain Honey Maple 1 qt. | Gilford Hardware
Minwax® Minwax Gel Stain Oil-Based Semi-Transparent Honey Maple 1 qt. $17.99 $19.99
Minwax Gel Stain Oil-Based Semi-Transparent Honey Maple 1 qt. • Benefits • • Description • • Specification • ✔Easy Application delivers uniform Color evenly on wood and non-wood surfaces ✔ Stain metal, veneer, and fiberglass! ✔ Dries in Just 8-10 Hours ✔ Covers 200 sq. ft. per Quart Minwax® Gel Stain was created to give you complete control over the staining process and to assist you in achieving stunning results. Its non-drip composition makes it simple to apply to vertical surfaces. Colors wood and non-wood surfaces, such as metal, veneer, and fiberglass, in a consistent manner. Application Tool: brush, cloth or foam applicator Location: interior or exterior* surfaces (* must be top-coated with an exterior clear protective finish) Recoat: 8-10 hours Dry Time: 24 hours Cleanup: mineral spirits Coverage: 200 sq. ft. per quart Coats: 1 coat. To darken the color, apply a second coat after 8-10 hours. Recommended Uses: woodwork, furniture, doors, molding, trim, cabinets, accessories Brand Name: Minwax Sub Brand: Wood Finish Transparency: Transparent Sheen: Low Luster Color: Honey Maple Base Type: Oil-Based Product Type: Gel Stain Container Size: 1 qt. VOC Level: Low VOC g/L Coverage Area: 200 sq. ft. Application: Wood UV Resistant: No Tintable: No Sealer: No Indoor or Outdoor: Indoor and Outdoor Application Method: Cloth, Brush, Foam Applicator Rich, uniform color *Easy-to-use *Non-drip formula
Minwax Wood Oil Stain Semi-Transparent Ebony 1 qt. | Gilford Hardware
Minwax® Minwax Wood Oil Stain Semi-Transparent Ebony 1 qt. $12.99
Minwax Wood Oil Stain Semi-Transparent Ebony 1 qt. • Benefits • • Description • • Specification • ✔ Coverage Area: 150 sq ft ✔ In one coat, a deeply penetrating color accentuates the beauty of wood. ✔ It dries in 2 hours and can be stained in one day. ✔ For even color, it resists lapping. ✔ Any naked or stripped wood surface can be transformed into a work of art. ✔ Interior staining of unpainted wood furniture, cabinets, doors, trim, molding, and floors is a breeze with this product. Minwax® Wood Finish® is a penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. It applies easily, absorbs deep into the pores of the wood, and is ideal for staining unfinished wood furniture, cabinets, doors, trim, molding, and hardwood floors. Brand Name: Minwax Sub Brand: Wood Finish Transparency: Semi-Transparent Color: Ebony Base Type: Oil-Based Product Type: Penetrating Wood Stain Container Size: 1 qt Tintable: No Application Method: Brush, Cloth Time Before Recoating: 4 hr VOC Level: Low VOC g/L Coverage Area: 150 sq ft UV Resistant: No Sealer: No Indoor or Outdoor: Indoor Color Family: Black
Minwax Wood Oil Stain Semi-Transparent Simply White 1 qt. | Gilford Hardware
Minwax® Minwax Wood Oil Stain Semi-Transparent Simply White 1 qt. $12.99 $13.99
Minwax Wood Oil Stain Semi-Transparent Simply White 1 qt.   • Benefits • • Description • • Specification • ✔ In one coat, a deeply penetrating color accentuates the beauty of wood. ✔ Coverage Area: 150 sq ft ✔ It dries in 2 hours and can be stained in one day. ✔ For even color, it resists lapping. ✔ Any naked or stripped wood surface can be transformed into a work of art. ✔ Interior staining of unpainted wood furniture, cabinets, doors, trim, molding, and floors is a breeze with this product. Minwax® Wood Finish® is a penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. It applies easily, absorbs deep into the pores of the wood, and is ideal for staining unfinished wood furniture, cabinets, doors, trim, molding, and hardwood floors. Brand Name: Minwax Sub Brand: Wood Finish Transparency: Semi-Transparent Color: Simply White Base Type: Oil-Based Product Type: Penetrating Wood Stain Container Size: 1 qt Tintable: No Application Method: Brush, Cloth Time Before Recoating: 4 hr VOC Level: Low VOC g/L Coverage Area: 150 sq ft UV Resistant: No Sealer: No Indoor or Outdoor: Indoor Color Family: White
Minwax Gel Stain Oil-Based Semi-Transparent Mahogany 1 qt. | Gilford Hardware
Minwax® Minwax Gel Stain Oil-Based Semi-Transparent Mahogany 1 qt. $17.99 $19.99
Minwax Gel Stain Oil-Based Semi-Transparent Mahogany 1 qt. • Benefits • • Description • • Specification • ✔ Easy Application deliverys uniform Color evenly on wood and non-wood surfaces ✔ Stain metal, veneer, and fiberglass! ✔ Dries in Just 8-10 Hours ✔ Covers 200 sq. ft. per Quart Minwax® Gel Stain was created to give you complete control over the staining process and to assist you in achieving stunning results. Its unique non-drip formula makes application easy for vertical surfaces. Colors wood and non-wood surfaces, such as metal, veneer, and fiberglass, in a consistent manner. WOOD PROJECTS: SURFACE PREPARATION: Surface must be dry, clean, and free of dirt, grease, glue, and existing coatings before staining. Sand the wood in the direction of the grain using a fine-grade sandpaper (#220) until smooth. Remove all sanding dust. To help ensure uniform acceptance of stain color and beautiful results, pretreat the wood with Minwax® Pre-Stain Wood Conditioner following label directions. PRODUCT PREPARATION AND COLOR TESTING: Stir Minwax® Gel Stain until creamy before and occasionally during use. Do not thin. Always test stain on a scrap piece or hidden area of the wood to verify desired color. STAIN APPLICATION: Apply a liberal amount of stain evenly with a brush or clean cloth. Wait 3 minutes and remove the excess stain with a clean cloth, wiping in the direction of the grain. Allow to dry 8-10 hours. To darken the color, apply additional coats of Minwax® Gel Stain repeating directions for application of first coat. Allow the stain to dry 8 to 10 hours between coats. Do not sand between coats. CLEAR FINISH APPLICATION: After 24 hours (dry time may be extended due to heavy application, low temperatures or high humidity), complete your project by applying a clear protective finish. Recommended finishes include Minwax® Fast-Drying Polyurethane or Water Based Oil Modified Polyurethane or Helmsman® Spar Urethane for exterior use. FIBERGLASS DOOR PROJECTS: For ease of staining and finishing, it is recommended that you finish the door before installation. PREPARATION: Make sure the door surface is free of all dirt and foreign matter. Stir Minwax® Gel Stain until creamy before use and occasionally during use. STAIN APPLICATION: Using a high quality natural bristle brush, spread a thin, even coat over the entire surface, starting with the raised panel sections. Always make final brush strokes in the direction of the embossed grain. Areas of heavier coats should be evened out before moving to a new section. Allow stain to dry approximately 6 to 8 hours. To darken the color, apply additional coats by following the instructions above. Let the stain dry 6 to 8 hours between coats. CLEAR FINISH APPLICATION: Be sure to apply a clear protective finish such as Minwax® Fast-Drying Polyurethane for interior use or Minwax® Helmsman® Spar Urethane for exterior applications. Before applying a clear finish, test the stain for dryness by wiping a small hidden area with a rag moistened with mineral spirits. If the last coat of stain can be removed with mineral spirits, do not apply a clear protective finish. Wait until the stain is completely dry. Allow the finish to dry at least 6 hours before installing or closing the door to avoid sticking. For exterior applications, apply a coat of clear protective finish every 12-24 months to keep the door looking beautiful. METAL DOOR PROJECTS: SURFACE PREPARATION: You will need: a graining tool, clean, dry, lint-free cloths, and clean, dry synthetic brushes. (Practice with the graining tool on a piece of scrap following the instructions in Step 3 until you feel comfortable using it.) Most metal doors come already primed, but usually not in the color you should be starting with. Select an oil-based base coat tinted to match the light tone in the wood you're trying to create. Then, mask all areas, such as glass, that you do not wish to stain and remove all hardware and doorknobs. Clean the surface with a cloth dampened with mineral spirits to remove all dust, grease and dirt. Apply a thin layer of the base coat paint to the entire door and allow it to dry thoroughly. STAIN APPLICATION: Plan to work on the door in separate vertical and horizontal sections. Mask off the horizontal sections as you work on the vertical sections. The vertical sections need to be masked off when working on the horizontal sections. Each section must be completely dry before either removing or applying masking tape. Select a Minwax® Gel Stain color that corresponds to the darkest color of the wood grain you are trying to create. Test stain on hidden area to verify desired color. Apply a thin, even coat of Gel Stain to a section using a natural bristle brush or a soft, lint-free cloth. Apply in the direction of the grain you intend to create. GRAINING: While the Gel Stain is wet, use a graining tool to create a wood grain pattern. Apply downward pressure while moving the graining tool across the section at a constant speed. Use a long, steady, non-stop stroke -- rocking the tool one rotation as you move from beginning to end. Keep the graining tool clean by wiping it often with a rag or paper towel between strokes. Repeat the above steps section by section. Not satisfied? Either wipe the surface clean or re-brush the area and start over again. Wet or tacky Gel Stain can be removed easily with a rag moistened with mineral spirits. To complete the graining process, wait until the first coat of Minwax® Gel Stain is completely dry (24-48 hours), then apply a second coat of Gel Stain with a natural bristle brush in the direction of the grain pattern created. Work section by section as you did before. There is no need to mask off any sections. While the Gel Stain is wet, you’ll want to use a clean, dry synthetic brush to remove the excess stain and create a uniform look. Use long brush strokes in the direction of the grain and remove the Gel Stain from the brush as it begins to accumulate with paper towels or a rag. The amount of Gel Stain left on will determine the depth of color. Helpful Hints: On metal doors, use masking tape to mask off areas where sections meet. Let the section dry to the touch before working on a section next to it. This ensures a clean, straight edge where panels meet. COVERAGE: Approximately 200 sq. ft. per quart. CLEANUP: Use mineral spirits or paint thinner. DANGER: Rags, steel wool, other waste soaked with this product, and sanding residue may spontaneously catch fire if improperly discarded. Immediately place rags, steel wool, other waste soaked with this product, and sanding residue in a sealed, water-filled, metal container. Dispose of in accordance with local fire regulations. CAUTIONS: CONTAINS ALIPHATIC HYDROCARBONS. Contents are COMBUSTIBLE. Keep away from heat and open flame. VAPOR HARMFUL. Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. FIRST AID: In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN. CONFORMS TO ASTM D-4236. Contact a physician for more health information. Brand Name: Minwax Sub Brand: Wood Finish Transparency: Transparent Sheen: Low Luster Color: Mahogany Base Type: Oil-Based Product Type: Gel Stain Container Size: 1 qt. Tintable: No Indoor or Outdoor: Indoor and Outdoor Coverage Area: 200 sq. ft. Sealer: No Application: Wood VOC Level: Low VOC g/L Application Method: Cloth, Brush, Foam Applicator UV Resistant: No Rich, uniform color *Easy-to-use *Non-drip formula
Minwax Pre-Stain Wood Conditioner Water Based 1 qt. | Gilford Hardware
Minwax® Minwax Pre-Stain Wood Conditioner Water Based 1 qt. $16.99 $18.99
Minwax Pre-Stain Wood Conditioner Water Based 1 qt. • Benefits • • Description • • Specification • ✔ White wash pickling helps control the effect of grain raising on soft and hardwoods and promotes uniform penetration. ✔ Use on all types of hard and Soft woods ✔ FAST, 1-5 min dry time! Minwax® Water Based Pre-Stain Wood Conditioner helps limit the effect of grain rising on both soft and hard woods by promoting consistent penetration of Minwax® Water Based Wood Stain and Minwax® White Wash Pickling Stain. To prepare for staining, use as the initial step in any water-based stain project on any type of wood.   Water-based pre-stain wood conditioner reduces blotching and streaking, resulting in a stunning, even stain color. Directions Instrucciones en Español (For Interior Use Only) WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority. Surface must be dry, clean, and free of dirt, grease, glue, and any existing coatings before staining. Sand the wood in the direction of the grain, first using medium-grade sandpaper (#120) working your way to fine-grade sandpaper (#220). Do Not Use Steel Wool. Remove all sanding dust. Stir contents thoroughly before use. Do not apply when temperature is below 55°F. Do not thin. Apply Minwax® Water Based Pre-Stain Wood Conditioner with a synthetic bristle brush, foam brush or clean cloth. Allow to penetrate 1-5 minutes. Remove excess with a clean cloth. Do not allow product that has not penetrated the wood to dry on the wood surface. After 15-30 minutes, lightly sand the surface with fine-grade sandpaper (#220) to smooth any raised grain. Remove all sanding dust. Surface is now ready for staining with Minwax® Water Based Wood Stain. COVERAGE: approximately 100-125 square feet per quart. CLEANUP: soap and warm water. CAUTIONS: Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attentional if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN. CONFORMS TO ASTM D-4236. Contact a physician for more health information. Brand Name: Minwax Sub Brand: Water-Based Pre-Stain Wood Conditioner Base Type: Water-Based Product Type: Pre-Stain Wood Conditioner Container Size: 1 qt Application Method: Brush/Cloth Coverage Area: 100-125 sq ft Indoor or Outdoor: Indoor Paintable: Yes Clean up: Soap and Water
Minwax Semi-Gloss Polyurethane 1 qt. | Gilford Hardware
Minwax® Minwax Semi-Gloss Polyurethane 1 qt. $18.99 $19.99
Minwax Semi-Gloss Polyurethane 1 qt. • Benefits • • Description • • Specification • Minwax Fast-Drying Polyurethane is a clear, oil-based, durable protective finish. • Provides long-lasting beauty and protection to any interior wood surface. • Among the most durable coatings for wood protection. • Ideal for woodwork, furniture, doors, cabinets and floors. • Can be used on both finished and unfinished wood. Minwax® Polyurethane Wood Finish will protect and enhance the appearance of your interior wood projects. This oil-based clear sealer protects woodwork, furniture, doors, cabinets, and floors while adding long-lasting beauty. It is a transparent coat that is one of the most durable coatings for wood protection against scratches, spills, and other hazards. It comes in a range of sheens and may be used on both finished and unfinished wood projects. Recoats may be done in as little as 4-6 hours thanks to the fast-drying formula. Brand Name: Minwax Sub Brand: Fast-Drying Polyurethane Sheen: Semi-Gloss Color: Clear Base Type: Oil-Based Product Type: Fast-Drying Polyurethane Container Size: 1 qt Time Before Recoating: 6 hr UV Resistant: No Coverage Area: 125 sq ft Full Cure Time: 24 hr Indoor or Outdoor: Indoor Color Family: Clear
Minwax High-Performance Wood Hardener 1 pt. | Gilford Hardware
Minwax® Minwax High-Performance Wood Hardener 1 pt. $15.99 $16.99
Minwax High-Performance Wood Hardener 1 pt. • Benefits • • Description • • Specification • ✔ Reinforce decayed or rotting wood easily ✔ High-Performance, Quick Drying ✔ Penetrates deep into the wood Minwax High-Performance Wood Hardener 1 pt. is a fast-drying liquid designed to fortify and strengthen decaying or rotting wood. The hardener penetrates the wood deeply, and the unique glue it contains bonds and strengthens the rotted wood fibers. High-Performance Wood Hardener prevents moisture from penetrating further and hardens to a rock-firm solid platform for lifting. Brand Name: Minwax Color: Natural Product Type: Wood Hardener Container Size: 1 pt. Clean-Up: Acetone Skid Resistant: No Paintable: Yes Dry Time: 2 hr. Packaging Type: Can Indoor or Outdoor: Indoor and Outdoor Sandable: Yes
Minwax No Scent Floor Cleaner Liquid 32 oz. | Gilford Hardware
Minwax® Minwax No Scent Floor Cleaner Liquid 32 oz. $6.99
Minwax No Scent Floor Cleaner Liquid 32 oz. • Benefits • • Description • • Specification • ✔ Cleans furniture, doors, and other wood surfaces ✔ No Scent ✔ Just Spray-and-wipe! Minwax wood cabinet cleaner is specially formulated to help you maintain the natural beauty of your finished wood and laminate surfaces. Brand Name: Minwax Scent: No Product Type: Floor Cleaner Product Form: Liquid Container Size: 32 oz. Packaging Type: Spray Bottle Application: Wood Floors, Furniture, Cabinets, and Laminated Floors Suitable for Grout: No Concentrated: No Not for use on waxed, oiled, shellacked or unfinished wood
Minwax Helmsman Semi-Gloss Clear Spar Urethane 1 pt. | Gilford Hardware
Minwax® Minwax Helmsman Semi-Gloss Clear Spar Urethane 1 pt. $14.99
Minwax Helmsman Semi-Gloss Clear Spar Urethane 1 pt. • Benefits • • Description • • Specification • ✔️ Transparent Semi-Gloss ✔️ UV Blockers Protect Wood ✔️ Brings out Natural Beauty of Wood Grain Minwax Helmsman Semi-Gloss Clear Spar Urethane 1 pt. is a safe transparent finish for exterior and interior wood that has been exposed to sunlight, water, or temperature changes. UV blockers are used to reduce the effects of the sun's graying and fading. Protects from rain and moisture by forming a protective barrier. As seasons and temperatures change, special oils allow the finish to expand and contract with the wood. Brand Name: Minwax Sub Brand: Helmsman Sheen: Semi-Gloss Color: Clear Product Type: Spar Urethane Container Size: 1 pt. UV Resistant: Yes Full Cure Time: 24 hr. Indoor or Outdoor: Indoor and Outdoor Coverage Area: 60 sq. ft. Time Before Recoating: 4 hr. Exceptional protection from sunlight, rain and moisture and temperature changes* Use for doors, windows, trim, bathroom cabinets and more* Recoat after 4 hours * Coats 3
Minwax Helmsman Gloss Clear Spar Urethane 1 pt. | Gilford Hardware
Minwax® Minwax Helmsman Gloss Clear Spar Urethane 1 pt. $14.99
Minwax Helmsman Gloss Clear Spar Urethane 1 pt. • Benefits • • Description • • Specification • ✔️ Transparent Gloss Finish ✔️ UV Blockers, Reduce Fading over time ✔️ Brings out Natural Beauty of Wood Grains Minwax Helmsman Gloss Clear Spar Urethane 1 pt. Minwax is a safe transparent finish for exterior and interior wood that has been exposed to sunlight, water, or temperature changes. UV blockers are used to reduce the effects of the sun's graying and fading. Protects from rain and moisture by forming a protective barrier. As seasons and temperatures change, special oils allow the finish to expand and contract with the wood. Brand Name: Minwax Sub Brand: Helmsman Sheen: Gloss Color: Clear Product Type: Spar Urethane Container Size: 1 pt. Time Before Recoating: 4 hr. UV Resistant: Yes Indoor or Outdoor: Indoor and Outdoor Full Cure Time: 24 hr. Coverage Area: 60 sq. ft. Exceptional protection from sunlight, rain and moisture and temperature changes* Use for doors, windows, trim, bathroom cabinets and more* Recoat after 4 hours * Coats 3
Minwax Helmsman Gloss Clear Spar Urethane 1 qt. | Gilford Hardware
Minwax® Minwax Helmsman Gloss Clear Spar Urethane 1 qt. $23.99
Minwax Helmsman Gloss Clear Spar Urethane 1 qt. • Benefits • • Description • • Specification • ✔️ Enhances the Natural Beauty of wood grain ✔️ UV & Water Resistant ✔️ Clear Gloss Finish Minwax Helmsman Gloss Clear Spar Urethane 1 qt. is a safe transparent finish for exterior and interior wood that has been exposed to sunlight, water, or temperature changes. UV blockers are used to reduce the effects of the sun's graying and fading. Protects from rain and moisture by forming a protective barrier. As seasons and temperatures change, special oils allow the finish to expand and contract with the wood. The ideal Brand Name: Minwax Sub Brand: Helmsman Sheen: Gloss Color: Clear Product Type: Spar Urethane Container Size: 1 qt. UV Resistant: Yes Time Before Recoating: 4 hr. Indoor or Outdoor: Indoor and Outdoor VOC Level: 275 g/L Full Cure Time: 24 hr. Coverage Area: 125 sq. ft. Crystal clean finish with exceptional protection from sunlight, rain and moisture, and temperature changes* Use on doors, windows, trim, bathroom cabinets, and more*Recoat after 2 hours* Coats 3-4
Minwax Polycrylic Protective Finish Gloss Clear 0.5 pt. | Gilford Hardware
Minwax® Minwax Polycrylic Protective Finish Gloss Clear 0.5 pt. $11.99
Minwax Polycrylic Protective Finish Gloss Clear 0.5 pt. • Benefits • • Description • • Specification • ✔ Interior wood surfaces, such as woodwork, furniture, doors, and cabinets, are protected and enhanced with this product. ✔ The crystal clear finish is suited for use over light woods such as maple, ash, and birch, as well as over painted surfaces. Water-Based Minwax® Wood Stains ✔ Quickly dries ✔ Warm water is all you need to clean things up.   Minwax Gloss Clear Polycrylic 0.5 pt. is a crystal clear protective topcoat that dries extremely quickly. Interior wood surfaces, such as woodwork, furniture, doors, and cabinets, are protected and enhanced with this product. Over light woods like oak, ash, and birch, as well as Minwax® Water-Based Wood Stains, the crystal clear finish is perfect. Quickly dries Hot water is everything you need to clean it up. Brand Name: Minwax Sheen: Gloss Color: Clear Product Type: Polycrylic Container Size: 0.5 pt. Time Before Recoating: 2 hr. VOC Level: 275 g/L Full Cure Time: 24 hr. Indoor or Outdoor: Indoor UV Resistant: No Coverage Area: 30 sq. ft. Use for woodwork, furniture, cabinets and doors* Durable protection* Ultra-fast drying* Easy water clean up* Recoat after 2 hours* Coats 2-3
Minwax Satin Clear Fast-Drying Polyurethane 1 qt. | Gilford Hardware
Minwax® Minwax Satin Clear Fast-Drying Polyurethane 1 qt. $18.99
Minwax Satin Clear Fast-Drying Polyurethane 1 qt. • Benefits • • Description • • Specification • ✔️ Gives any indoor wood surface long-lasting beauty and protection. ✔️ One of the most long-lasting wood protective treatments. ✔️ Woodwork, furniture, doors, cabinets, and flooring are all good candidates for Minwax Polyurethane ✔️ Both polished and untreated wood can be utilized. Minwax® Polyurethane Wood Finish will protect and enhance the beauty of your interior wood projects. This oil-based clear sealer protects woodwork, furniture, doors, cabinets, and floors while adding long-lasting beauty. It is a transparent coat that is one of the most durable coatings for wood protection against scratches, spills, and other hazards. It comes in a range of sheens and may be used on both completed and unfinished wood projects. The fast-drying formula allows for quick recoats in 4-6 hours. Application Tool: natural bristle brush, foam brush, or lambswool applicator Location: interior wood surfaces Recoat: after 4-6 hours Dry Time: 24 hours before light use Cleanup: mineral spirits or paint thinner Coverage: 125 sq. ft. per quart Coats: 2-3 Recommended Uses: woodwork, furniture, doors, cabinets and floors Brand Name: Minwax Sheen: Satin Color: Clear Product Type: Fast-Drying Polyurethane Container Size: 1 qt. Time Before Recoating: 6 hr. Coverage Area: 125 sq. ft. Indoor or Outdoor: Indoor Full Cure Time: 24 hr. UV Resistant: No SCAQMD version Ace No. 1327741* Use for woodwork, furniture, doors, cabinets and floors* Recoat after 4-6 hours * Coats 2-3 Safety Data Sheet
Minwax Satin Clear Fast-Drying Polyurethane 0.5 pt. | Gilford Hardware
Minwax® Minwax Polyurethane Fast-Drying Clear Satin Clear 0.5 pt. $9.99 $10.99
Minwax Polyurethane Fast-Drying Clear Satin Clear 0.5 pt. • Benefits • • Description • • Specification • ✔ Gives any indoor wood surface long-lasting beauty and protection. ✔ One of the most long-lasting wood protection applications. ✔ Woodwork, furniture, doors, cabinets, and floors are all great choices. ✔ Both finished and unfinished wood can be used. ✔ Coverage: 125 sq. ft. per quart   Minwax® Polyurethane Wood Finish will protect and improve the appearance of your interior wood projects. This oil-based clear sealer protects woodwork, furniture, doors, cabinets, and floors while adding long-lasting beauty. It is a transparent coat that is one of the most durable coatings for wood protection against scratches, spills, and other hazards. It comes in a variety of sheens and can be used on both completed and unfinished wood projects. Recoats can be done in as little as 4-6 hours because to the fast-drying process. Application Tool: natural bristle brush, foam brush, or lambswool applicator Location: interior wood surfaces Recoat: after 4-6 hours Dry Time: 24 hours before light use Cleanup: mineral spirits or paint thinner Coverage: 125 sq. ft. per quart Coats: 2-3 Recommended Uses: woodwork, furniture, doors, cabinets and floors Brand Name: Minwax Sub Brand: Fast-Drying Polyurethane Sheen: Satin Color: Clear Base Type: Oil-Based Product Type: Fast-Drying Polyurethane Container Size: 0.5 pt Time Before Recoating: 6 hr UV Resistant: No Coverage Area: 30 sq ft Full Cure Time: 24 hr Indoor or Outdoor: Indoor Color Family: Clear Coats 2-3 Recoat after 4-6 hours SCAQMD version Ace No. 1327576 Use for woodwork, furniture, doors, cabinets and floors
Minwax Gloss Clear Fast-Drying Polyurethane 1 qt. | Gilford Hardware
Minwax® Minwax Gloss Clear Fast-Drying Polyurethane 1 qt. $18.99 $19.99
Minwax Gloss Clear Fast-Drying Polyurethane 1 qt. • Benefits • • Description • • Specification • ✔️ Fast Drying ✔️ Durable Finish ✔️ Brings out Beauty of Wood Minwax® Helmsman® Spar Urethane is a safe transparent finish for exterior and interior wood that has been exposed to sunlight, water, or temperature changes. UV blockers are used to reduce the effects of the sun's graying and fading. Protects from rain and moisture by forming a protective barrier. As seasons and temperatures change, special oils allow the finish to expand and contract with the wood. Brand Name: Minwax Sheen: Gloss Color: Clear Product Type: Fast-Drying Polyurethane Container Size: 1 qt. Coverage Area: 125 sq. ft. Time Before Recoating: 6 hr. Indoor or Outdoor: Indoor UV Resistant: No Full Cure Time: 24 hr.
Minwax Clear Gloss Fast-Drying Polyurethane 0.5 pt. | Gilford Hardware
Minwax® Minwax Clear Gloss Fast-Drying Polyurethane 0.5 pt. $9.99
Minwax Clear Gloss Fast-Drying Polyurethane 0.5 pt. • Benefits • • Description • • Specification • 🚪 Gives any indoor wood surface long-lasting beauty and protection. 🚪 One of the most long-lasting wood protection treatments. 🚪 Works Great on: Woodwork, furniture, doors, cabinets, and floors 🚪 Use on finished and unfinished wood. Minwax Clear Gloss Fast-Drying Polyurethane 0.5 pt.. is a great polyurethane for any project around the house. It's designed to give any wood surface long lasting protection and beauty. It dries quickly, and works great on all sorts of interior woodwork. It doesn't matter if it's finished or unfinished wood, Brand Name: Minwax Sheen: Gloss Color: Clear Product Type: Fast-Drying Polyurethane Container Size: 0.5 pt. Indoor or Outdoor: Indoor UV Resistant: No Full Cure Time: 24 hr. Time Before Recoating: 6 hr. Coverage Area: 125 sq. ft. SCAQMD version Ace No. 1327543 Use for woodwork, doors, cabinets, and floors Recoat after 4-6 hours Coats 2-3
Minwax Semi-Transparent Gunstock Wood Stain 1 qt. | Gilford Hardware
Minwax® Minwax Wood Oil Stain Semi-Transparent Gunstock 1 qt. $9.99
Minwax Wood Oil Stain Semi-Transparent Gunstock 1 qt. • Benefits • • Description • • Specification • ✔ Coverage Area: 125-150 sq. ft ✔ Deeply penetrating color enhances wood’s beauty in one coat. ✔ Dries in 2 hours; makes it possible to stain in a day. ✔ Resists lapping for even color. ✔ Can be used to add beauty to any bare or stripped wood surface. ✔ Perfect for interior staining unfinished wood furniture, cabinets, doors, trim, molding, and floors. Minwax Wood Finish Semi-Transparent Sedona Red Oil-Based Wood Stain 1 qt. is a penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. Our innovative formula delivers the same premium oil-rich color as before, but in a single coat that dries in just two hours. Start your project today and finish today with a faster dry time. Application Tool: natural bristle brush, or clean cloth Location: interior wood surfaces Recoat: 2-4 hours depending on color Dry Time: 2-4 hours depending on color Topcoat: 4-6 hours depending on color Cleanup: mineral spirits or paint thinner Coverage: 150 sq. ft. per quart Coats: 1 coat. To darken the color, apply a second coat after 2-4 hours (time dependant on color). Recommended Uses: unfinished wood furniture, woodwork, doors, hardwood floors, cabinets, accessories and trim New: 1 Brand Name: Minwax Sub Brand: Wood Finish Transparency: Semi-Transparent Color: Gunstock Base Type: Oil-Based Product Type: Penetrating Wood Stain Container Size: 1 qt Tintable: No Application Method: Brush, Cloth Time Before Recoating: 4 hr VOC Level: Low VOC g/L Coverage Area: 150 sq ft UV Resistant: No Sealer: No Indoor or Outdoor: Indoor Color Family: Orange
Minwax Wood Stain Oil Semi-Transparent Dark Walnut 1 qt. | Gilford Hardware
Minwax® Minwax Wood Stain Oil Semi-Transparent Dark Walnut 1 qt. $9.99 $10.99
Minwax Wood Stain Oil Semi-Transparent Dark Walnut 1 qt. • Benefits • • Description • • Specification • ✔ Oil Based, Deep Penetrating ✔ Coverage Area: 125-150 sq. ft ✔ Beautiful Finish ✔ Brings out Natural Beauty of Wood Minwax Wood Stain Oil Semi-Transparent Dark Walnut 1 qt.. is a penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. Our innovative formula delivers the same premium oil-rich color as before, but in a single coat that dries in just two hours. Start your project today and finish today with a faster dry time. Application Tool: natural bristle brush, or clean cloth Location: interior wood surfaces Recoat: 2-4 hours depending on color Dry Time: 2-4 hours depending on color Topcoat: 4-6 hours depending on color Cleanup: mineral spirits or paint thinner Coverage: 150 sq. ft. per quart Coats: 1 coat. To darken the color, apply a second coat after 2-4 hours (time dependant on color). Recommended Uses: unfinished wood furniture, woodwork, doors, hardwood floors, cabinets, accessories and trim New: 1 Brand Name: Minwax Sub Brand: Wood Finish Transparency: Semi-Transparent Color: Dark Walnut Base Type: Oil-Based Product Type: Stain Container Size: 1 qt. Application Method: Cloth, Brush Coverage Area: 125-150 sq. ft. UV Resistant: No Tintable: No VOC Level: Low VOC g/L Indoor or Outdoor: Indoor Sealer: No
Minwax Oil Stain Semi-Transparent Dark Walnut 0.5 pt. | Gilford Hardware
Minwax® Minwax Oil Stain Semi-Transparent Dark Walnut 0.5 pt. $7.99 $8.99
Minwax Oil Stain Semi-Transparent Dark Walnut 0.5 pt.   • Benefits • • Description • • Specification • ✔️ Deeply penetrating color enhances wood’s beauty in one coat. ✔️ Dries in 2 hours; makes it possible to stain in a day. ✔️ Resists lapping for even color. ✔️ Can be used to add beauty to any bare or stripped wood surface. ✔️ Perfect for interior staining unfinished wood furniture, cabinets, doors, trim, molding, and floors. Minwax Oil Stain Semi-Transparent Dark Walnut 0.5 pt. is a penetrating oil-based wood finish that generates a rich color that accentuates the natural grain of the wood. Our innovative formula creates the same quality oil-rich color in a single coat that dries in just two hours. Begin your project today and finish it today with less drying time. Application Directions Application Tool: natural bristle brush, or clean cloth Location: interior wood surfaces Recoat: 2-4 hours depending on color Dry Time: 2-4 hours depending on color Topcoat: 4-6 hours depending on color Cleanup: mineral spirits or paint thinner Coverage: 150 sq. ft. per quart Coats: 1 coat. To darken the color, apply a second coat after 2-4 hours (time dependant on color). Recommended Uses: unfinished wood furniture, woodwork, doors, hardwood floors, cabinets, accessories and trim Brand Name: Minwax Sub Brand: Wood Finish Transparency: Semi-Transparent Color: Dark Walnut Base Type: Oil-Based Product Type: Wood Stain Container Size: 0.5 pt. Indoor or Outdoor: Indoor Application Method: Cloth, Brush Tintable: No Coverage Area: 31-37 sq. ft. VOC Level: Low VOC UV Resistant: No Sealer: No Time Before Recoating: 4-6 hr.
Minwax Wood Stain Oil Semi-Transparent Cherry 1 qt. | Gilford Hardware
Minwax® Minwax Wood Stain Oil Semi-Transparent Cherry 1 qt. $11.99
Minwax Wood Stain Oil Semi-Transparent Cherry 1 qt. • Benefits • • Description • • Specification • ✔ Oil Based, Deep Penetrating ✔ Coverage Area: 125-150 sq. ft ✔ Beautiful Finish ✔ Brings out Natural Beauty of Wood Minwax Wood Finish Semi-Transparent Sedona Red Oil-Based Wood Stain 1 qt. is a penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. Our innovative formula delivers the same premium oil-rich color as before, but in a single coat that dries in just two hours. Start your project today and finish today with a faster dry time. Application Tool: natural bristle brush, or clean cloth Location: interior wood surfaces Recoat: 2-4 hours depending on color Dry Time: 2-4 hours depending on color Topcoat: 4-6 hours depending on color Cleanup: mineral spirits or paint thinner Coverage: 150 sq. ft. per quart Coats: 1 coat. To darken the color, apply a second coat after 2-4 hours (time dependant on color). Recommended Uses: unfinished wood furniture, woodwork, doors, hardwood floors, cabinets, accessories and trim New: 1 Brand Name: Minwax Sub Brand: Wood Finish Transparency: Semi-Transparent Color: Cherry Base Type: Oil-Based Product Type: Stain Container Size: 1 qt. Application Method: Cloth, Brush Tintable: No VOC Level: Low VOC g/L Indoor or Outdoor: Indoor Sealer: No UV Resistant: No Coverage Area: 125-150 sq. ft.
Minwax Oil Stain Semi-Transparent Cherry 1/2 pt. | Gilford Hardware
Minwax® Minwax Oil Stain Semi-Transparent Cherry 1/2 pt. $7.99
Minwax Oil Stain Semi-Transparent Cherry 1/2 pt. • Benefits • • Description • • Specification • ✔️ Oil Based ✔️ Rich Colors Bring out Natural Beauty of Wood Grain ✔️ Short Drying time Minwax® Wood Finish is a penetrating oil-based wood stain that offers a rich color that complements the natural grain of the wood. Our breakthrough formula creates the same quality oil-rich color in a single coat that dries in just two hours. Begin your project today and finish it tomorrow with less drying time. Application Tool: natural bristle brush, or clean cloth Location: interior wood surfaces Recoat: 2-4 hours depending on color Dry Time: 2-4 hours depending on color Topcoat: 4-6 hours depending on color Cleanup: mineral spirits or paint thinner Coverage: 150 sq. ft. per quart Coats: 1 coat. To darken the color, apply a second coat after 2-4 hours (time dependant on color). Recommended Uses: unfinished wood furniture, woodwork, doors, hardwood floors, cabinets, accessories and trim   Deeply penetrating color enhances wood’s beauty in one coat. Dries in 2 hours; makes it possible to stain in a day. Resists lapping for even color. Can be used to add beauty to any bare or stripped wood surface. Perfect for interior staining unfinished wood furniture, cabinets, doors, trim, molding and floors. Brand Name: Minwax Sub Brand: Wood Finish Transparency: Semi-Transparent Color: Cherry Base Type: Oil-Based Product Type: Stain Container Size: 1/2 pt. VOC Level: Low VOC g/L Sealer: No Tintable: No Coverage Area: 125-150 sq. ft. Application Method: Cloth, Brush UV Resistant: No Indoor or Outdoor: Indoor
Minwax Oil Stain Semi-Transparent Early American 1 qt. | Gilford Hardware
Minwax® Minwax Oil Stain Semi-Transparent Early American 1 qt. $9.99
Minwax Oil Stain Semi-Transparent Early American 1 qt. • Benefits • • Description • • Specification • ✔️ Beautifully enhances with rich color and protects ✔️ Oil Based ✔️ Single coat dries in two hours! Minwax® Wood Finish is a penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. Our innovative formula delivers the same premium oil-rich color as before, but in a single coat that dries in just two hours. Start your project today and finish today with a faster dry time. Brand Name: Minwax Sub Brand: Wood Finish Transparency: Semi-Transparent Color: Early American Base Type: Oil-Based Product Type: Stain Container Size: 1 qt. UV Resistant: No Coverage Area: 125-150 sq. ft. Sealer: No Tintable: No Application Method: Cloth, Brush Indoor or Outdoor: Indoor VOC Level: Low VOC g/L
Minwax Oil Stain Semi-Transparent Early American 0.5 pt. | Gilford Hardware
Minwax® Minwax Oil Stain Semi-Transparent Early American 0.5 pt. $7.99
Minwax Oil Stain Semi-Transparent Early American 0.5 pt. • Benefits • • Description • • Specification • ✔️Deeply penetrating color enhances wood’s beauty in one coat. ✔️Dries in 2 hours; makes it possible to stain in a day. ✔️ Resists lapping for even color. ✔️ Can be used to add beauty to any bare or stripped wood surface. ✔️Perfect for interior staining unfinished wood furniture, cabinets, doors, trim, molding and floors. Minwax Oil Stain Semi-Transparent Early American 0.5 pt. is a penetrating oil-based wood polish that adds rich color and highlights the natural wood grain. It's easy to use and penetrates deep into the wood's pores. Directions Application Tool: natural bristle brush, or clean cloth Location: interior wood surfaces Recoat: 2-4 hours depending on color Dry Time: 2-4 hours depending on color Topcoat: 4-6 hours depending on color Cleanup: mineral spirits or paint thinner Coverage: 150 sq. ft. per quart Coats: 1 coat. To darken the color, apply a second coat after 2-4 hours (time dependant on color). Recommended Uses: unfinished wood furniture, woodwork, doors, hardwood floors, cabinets, accessories and trim New: 1 Brand Name: Minwax Sub Brand: Wood Finish Transparency: Semi-Transparent Color: Early American Base Type: Oil-Based Product Type: Wood Stain Container Size: 0.5 pt. VOC Level: Low VOC g/L Application Method: Cloth, Brush UV Resistant: No Sealer: No Coverage Area: 31-37 sq. ft. Indoor or Outdoor: Indoor Tintable: No

SALES TAX FREE

PICK UP IN STORE

TOP QUALITY BRANDS

LOCAL DELIVERY