Paint & Supplies

Minwax Oil Stain Semi-Transparent Jacobean 0.5 pt.   • Benefits • • Description • • Specification • ✔ Deeply penetrating color enhances wood’s beauty in one coat. ✔ Dries in 2 hours; makes it possible to stain in a day. ✔ Resists lapping for even color. ✔ Can be used to add beauty to any bare or stripped wood surface. ✔ Perfect for interior staining unfinished wood furniture, cabinets, doors, trim, molding, and floors. Minwax® Wood Finish® is a penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. It applies easily, absorbs deep into the pores of the wood, and is ideal for staining unfinished wood furniture, cabinets, doors, trim, molding, and hardwood floors. Brand Name: Minwax Sub Brand: Wood Finish Transparency: Semi-Transparent Color: Classic Gray Base Type: Oil-Based Product Type: Penetrating Wood Stain Container Size: 0.5 pt Tintable: No Application Method: Brush, Cloth Time Before Recoating: 4 hr VOC Level: Low VOC g/L Coverage Area: 37 sq ft UV Resistant: No Sealer: No Indoor or Outdoor: Indoor Color Family: Gray

Minwax Oil Stain Semi-Transparent Classic Gray 0.5 pt.   • Benefits • • Description • • Specification • ✔ Deeply penetrating color enhances wood’s beauty in one coat. ✔ Dries in 2 hours; makes it possible to stain in a day. ✔ Resists lapping for even color. ✔ Can be used to add beauty to any bare or stripped wood surface. ✔ Perfect for interior staining unfinished wood furniture, cabinets, doors, trim, molding, and floors. Minwax® Wood Finish® is a penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. It applies easily, absorbs deep into the pores of the wood, and is ideal for staining unfinished wood furniture, cabinets, doors, trim, molding, and hardwood floors. Brand Name: Minwax Sub Brand: Wood Finish Transparency: Semi-Transparent Color: Classic Gray Base Type: Oil-Based Product Type: Penetrating Wood Stain Container Size: 0.5 pt Tintable: No Application Method: Brush, Cloth Time Before Recoating: 4 hr VOC Level: Low VOC g/L Coverage Area: 37 sq ft UV Resistant: No Sealer: No Indoor or Outdoor: Indoor Color Family: Gray

Minwax Wood Pencil Cherry, Chestnut, English Chestnut, Red Walnut 1 oz. • Benefits • • Description • • Specification • ✔ Perfect for easy touch-up and repair of scratches and nail holes in stained and finished wood. ✔ No-mess way to maintain the beauty of wood ✔ Easy-to-use Minwax® Blend-Fil® Pencils are ideal for touch-ups and repairs on stained and finished wood. They're a no-fuss, quick solution to keep wood looking beautiful. Minwax® Blend-Fil® Pencils are available in a number of hues to complement specific Minwax® Wood Finish stain colors and many other wood stains. They can also be blended to produce unique colors. Brand Name: Minwax Sub Brand: Blend-Fil Color: No. 7 Red Mahogany, Red Oak Product Type: Wood Pencil Container Size: 1 oz Indoor or Outdoor: Indoor Clean Up: Mineral Spirits Packaging Type: Carded Dry Time: 0 hr Sandable: No Paintable: No Skid Resistant: No

Minwax Wood Pencil Cherry, Chestnut, English Chestnut, Red Walnut 1 oz. • Benefits • • Description • • Specification • ✔ Perfect for easy touch-up and repair of scratches and nail holes in stained and finished wood. ✔ No-mess way to maintain the beauty of wood ✔ Easy-to-use Minwax® Blend-Fil® Pencils are ideal for touch-ups and repairs on stained and finished wood. They're a no-fuss, quick solution to keep wood looking beautiful. Minwax® Blend-Fil® Pencils are available in a number of hues to complement specific Minwax® Wood Finish stain colors and many other wood stains. They can also be blended to produce unique colors. Brand Name: Minwax Sub Brand: Blend-Fil Color: No. 6 Cherry, Chestnut, English Chestnut, Red Walnut Product Type: Wood Pencil Container Size: 1 oz Indoor or Outdoor: Indoor Clean Up: Mineral Spirits Packaging Type: Carded Dry Time: 0 hr Sandable: No Paintable: No Skid Resistant: No

Minwax Wood Pencil Pickled Oak 1 oz. • Benefits • • Description • • Specification • ✔ Perfect for easy touch-up and repair of scratches and nail holes in stained and finished wood. ✔ No-mess way to maintain the beauty of wood ✔ Easy-to-use Minwax® Blend-Fil® Pencils are ideal for touch-ups and repairs on stained and finished wood. They're a no-fuss, quick solution to keep wood looking beautiful. Minwax® Blend-Fil® Pencils are available in a number of hues to complement specific Minwax® Wood Finish stain colors and many other wood stains. They can also be blended to produce unique colors. Brand Name: Minwax Sub Brand: Blend-Fil Color: No. 4 Pickled Oak Product Type: Wood Pencil Container Size: 1 oz Indoor or Outdoor: Indoor Clean Up: Mineral Spirits Packaging Type: Carded Dry Time: 0 hr Sandable: No Paintable: No Skid Resistant: No

Quick Grip High Strength All Purpose Adhesive 2 oz. • Benefits • • Description • • Specification • ✔ Quick Grab ✔ Fast Drying, Dries Crystal, Clear Flexible ✔ Water-Proof, Weather -Proof ✔ Paintable ✔ Does Not Foam, Does Not Expand ✔ Won’t Bond To Skin ✔ Does Not Yellow Quick Grip BEACON ADHESIVES Permanent Adhesive for All Purposes. All those difficult-to-use super glues and gels have been replaced with this improved alternative. Quick to dry Quick Grip gives you enough time to arrange objects for a proper fit while avoiding the possibility of finger bonding. This ultra-durable adhesive is ideal for both indoor and outdoor operations. When dried, it is water and weather resistant, as well as flexible and paintable. Plastics, wood, paper, metal, textiles, leather, ceramics, and more may all benefit from this product. Brand Name: Beacon Adhesion Strength: High Strength Product Type: Quick Grip All Purpose Adhesive Container Size: 2 oz UV Resistant: Yes Packaging Type: Blister Card Color: Clear Indoor or Outdoor: Indoor and Outdoor Recommended Surface: Plastic, Canvas, Fabrics, Rubber, Metal, Paper, Ca The superior alternative to all those hard-to-use: The superior alternative to all those hard-to-use super glues and gels. Quick drying, but still allows time to position items for a perfect fit but without the risk of binding fingers together. Water

Master Painter Mini-Roller and Cover 4" x 1/2" Nap • Benefits • • Description • • Specification • ✔ Great for use on trim and tight spaces ✔ Ideal for Low VOC paints made with White Woven Fabric ✔ Features 1/2" Woven Nap, Great for painting Semi-Rough Surfaces ✔ Includes Paint Roller frame & one paint roller The Master Painter Mini-Roller and Cover 4" x 1/2" Nap is a great choice paint roller for rolling interior trim and tight spaces. It features a white woven fabric 1/2" nap, which is great for semi rough surfaces. It works great with all types of paints and finishes and recommended uses include walls, ceilings, textured walls, drywall, plaster, and semi-smooth surfaces. Next time you need a quality paint roller visit Gilford Hardware & Outdoor Power Equipment! Brand: Master Painter Product Type: Paint Roller Frame + Paint Roller Product Size: 4" Wide, 1/2" Nap

Shur-Line Trim Paint Roller Kit 4" • Benefits • • Description • • Specification • ✔ Includes • 4" Knit Trim roller cover 3/8 nap. 2x • 4" Trim Roller Frame • Plastic Roller Tray ✔ Everything you need to start painting trim or areas in tight, hard to reach places ✔ Great for smooth and roughish surfaces, interior and exterior Two 4 inch White/Knit Fabric Roller Covers, a 4 inch Roller Frame, and a Plastic Paint Tray are included in this excellent 4 Piece Trim Roller Set. These roller covers have a high density white knit fabric that makes them excellent for use with today's heavier Paint + Primer paints. The fibers' higher density allows for better paint collection, resulting in more coverage between loadings and fewer trips to the paint tray. These rollers are designed to work with all paints and stains, including oil and latex, and deliver a high-end effect on flat and eggshell finishes in tight spots where a 9-inch roller simply won't fit. Brand Name: Shur-Line Width: 4 in. Roller Type: Trim Product Type: Paint Roller Kit Threaded End: Yes Tray Material: Plastic Surface Application: All Paint Surfaces Handle Length: 12 in. Number in Package: 4 pc Nap Size: 3/8 in. Frame Material: Plastic/Steel Recommended Surface: All Surfaces Roller Cover Included: Yes Roller Diameter: 1.5 in. Packaging Type: Bulk Nap Material: Polyester Shed resistant covers Teflon cover for easy clean up

Minwax Oil-Based Wood Stain Semi-Transparent Ebony 0.5 pt. • Benefits • • Description • • Specification • ✔ Interior staining of unpainted wood furniture, cabinets, doors, trim, molding, and floors is a breeze with this product. ✔ In one coat, a deeply penetrating color accentuates the beauty of wood. ✔ Any naked or stripped wood surface can be transformed into a work of art. ✔ It dries in 2 hours and can be stained in one day. ✔ For even color, it resists lapping. Minwax® Wood finish is a penetrating oil-based wood stain that adds rich color and highlights the natural wood grain. Our breakthrough process creates the same premium oil-rich color in a single coat that dries in only two hours. Begin your project today and complete it tomorrow with the new faster dry time. Use on: interior wood surfaces Recoat: 2-4 hours depending on color Dry Time: 2-4 hours depending on color Topcoat: 4-6 hours depending on color Cleanup: mineral spirits or paint thinner Coverage: 150 sq. ft. per quart Coats: 1 coat. To darken the color, apply a second coat after 2-4 hours (time dependant on color). Recommended Uses: unfinished wood furniture, woodwork, doors, hardwood floors, cabinets, accessories and trim Brand Name: Minwax Sub Brand: Wood Finish Transparency: Semi-Transparent Color: Ebony Base Type: Oil-Based Product Type: Penetrating Wood Stain Container Size: 0.5 pt Tintable: No Application Method: Brush, Cloth Time Before Recoating: 4 hr VOC Level: Low VOC g/L Coverage Area: 37 sq ft UV Resistant: No Sealer: No Indoor or Outdoor: Indoor Color Family: Black

Minwax Oil-Based Wood Stain Semi-Transparent Early American 1 Gal. • Benefits • • Description • • Specification • ✔ In one coat, a deeply penetrating color accentuates the beauty of wood. ✔ It dries in 2 hours and can be stained in one day. ✔ For even color, it resists lapping. ✔ Any naked or stripped wood surface can be transformed into a work of art. ✔ Interior staining of unpainted wood furniture, cabinets, doors, trim, molding, and floors is a breeze with this product.   Minwax® Wood finish is a penetrating oil-based wood stain that adds rich color and highlights the natural wood grain. Our breakthrough process creates the same premium oil-rich color in a single coat that dries in only two hours. Begin your project today and complete it tomorrow with the new faster dry time. Use on: interior wood surfaces Recoat: 2-4 hours depending on color Dry Time: 2-4 hours depending on color Topcoat: 4-6 hours depending on color Cleanup: mineral spirits or paint thinner Coverage: 150 sq. ft. per quart Coats: 1 coat. To darken the color, apply a second coat after 2-4 hours (time dependant on color). Recommended Uses: unfinished wood furniture, woodwork, doors, hardwood floors, cabinets, accessories and trim Brand Name: Minwax Sub Brand: Wood Finish 250 VOC Compliant Transparency: Semi-Transparent Color: Early American Base Type: Oil-Based Product Type: Penetrating Wood Stain Container Size: 1 gal Tintable: No Application Method: Brush, Cloth Time Before Recoating: 4 hr VOC Level: 250 g/L Coverage Area: 500 sq ft UV Resistant: No Sealer: No Indoor or Outdoor: Indoor Color Family: Brown

Minwax Oil-Based Wood Stain Semi-Transparent Fruitwood 1 Gal. • Benefits • • Description • • Specification • ✔ In one coat, a deeply penetrating color accentuates the beauty of wood. ✔ It dries in 2 hours and can be stained in one day. ✔ For even color, it resists lapping. ✔ Any naked or stripped wood surface can be transformed into a work of art. ✔ Interior staining of unpainted wood furniture, cabinets, doors, trim, molding, and floors is a breeze with this product.   Minwax® Wood finish is a penetrating oil-based wood stain that adds rich color and highlights the natural wood grain. Our breakthrough process creates the same premium oil-rich color in a single coat that dries in only two hours. Begin your project today and complete it tomorrow with the new faster dry time. Use on: interior wood surfaces Recoat: 2-4 hours depending on color Dry Time: 2-4 hours depending on color Topcoat: 4-6 hours depending on color Cleanup: mineral spirits or paint thinner Coverage: 150 sq. ft. per quart Coats: 1 coat. To darken the color, apply a second coat after 2-4 hours (time dependant on color). Recommended Uses: unfinished wood furniture, woodwork, doors, hardwood floors, cabinets, accessories and trim Brand Name: Minwax Sub Brand: Wood Finish 250 VOC Compliant Transparency: Semi-Transparent Color: Fruitwood Base Type: Oil-Based Product Type: Penetrating Wood Stain Container Size: 1 gal Tintable: No Application Method: Brush, Cloth Time Before Recoating: 4 hr VOC Level: 250 g/L Coverage Area: 500 sq ft UV Resistant: No Sealer: No Indoor or Outdoor: Indoor Color Family: Yellow

Minwax Oil-Based Wood Stain Semi-Transparent Cherry 1 Gal. • Benefits • • Description • • Specification • ✔ In one coat, a deeply penetrating color accentuates the beauty of wood. ✔ It dries in 2 hours and can be stained in one day. ✔ For even color, it resists lapping. ✔ Any naked or stripped wood surface can be transformed into a work of art. ✔ Interior staining of unpainted wood furniture, cabinets, doors, trim, molding, and floors is a breeze with this product.   Minwax® Wood finish is a penetrating oil-based wood stain that adds rich color and highlights the natural wood grain. Our breakthrough process creates the same premium oil-rich color in a single coat that dries in only two hours. Begin your project today and complete it tomorrow with the new faster dry time. Use on: interior wood surfaces Recoat: 2-4 hours depending on color Dry Time: 2-4 hours depending on color Topcoat: 4-6 hours depending on color Cleanup: mineral spirits or paint thinner Coverage: 150 sq. ft. per quart Coats: 1 coat. To darken the color, apply a second coat after 2-4 hours (time dependant on color). Recommended Uses: unfinished wood furniture, woodwork, doors, hardwood floors, cabinets, accessories and trim Brand Name: Minwax Sub Brand: Wood Finish 250 VOC Compliant Transparency: Semi-Transparent Color: Cherry Base Type: Oil-Based Product Type: Penetrating Wood Stain Container Size: 1 gal Tintable: No Application Method: Brush, Cloth Time Before Recoating: 4 hr VOC Level: 250 g/L Coverage Area: 500 sq ft UV Resistant: No Sealer: No Indoor or Outdoor: Indoor Color Family: Red

Minwax Polyurethane Oil Fast Drying Clear Semi-Gloss  0.5 pt. • Benefits • • Description • • Specification • ✔Gives any indoor wood surface long-lasting beauty and protection. ✔ One of the most long-lasting wood protection treatments. ✔ Woodwork, furniture, doors, cabinets, and floors are all great spots to use Minwax Polyurethane Oil ✔ Both finished and untreated wood can be used.   Minwax® Polyurethane Wood Finish will protect and enhance the beauty of your interior wood projects. This oil-based clear sealer protects woodwork, furniture, doors, cabinets, and floors while adding long-lasting beauty. It is a transparent coat that is one of the most durable coatings for wood protection against scratches, spills, and other hazards. It comes in a variety of sheens and can be used on both completed and unfinished wood projects. Recoats can be done in as little as 4-6 hours because to the fast-drying process. Brand Name: Minwax Sub Brand: Fast-Drying Polyurethane Sheen: Semi-Gloss Color: Clear Base Type: Oil-Based Product Type: Fast-Drying Polyurethane Container Size: 0.5 pt Time Before Recoating: 6 hr UV Resistant: No Coverage Area: 30 sq ft Full Cure Time: 24 hr Indoor or Outdoor: Indoor Color Family: Clear

Minwax Gel Stain Oil-Based Semi-Transparent Honey Maple 1 qt. • Benefits • • Description • • Specification • ✔Easy Application delivers uniform Color evenly on wood and non-wood surfaces ✔ Stain metal, veneer, and fiberglass! ✔ Dries in Just 8-10 Hours ✔ Covers 200 sq. ft. per Quart Minwax® Gel Stain was created to give you complete control over the staining process and to assist you in achieving stunning results. Its non-drip composition makes it simple to apply to vertical surfaces. Colors wood and non-wood surfaces, such as metal, veneer, and fiberglass, in a consistent manner. Application Tool: brush, cloth or foam applicator Location: interior or exterior* surfaces (* must be top-coated with an exterior clear protective finish) Recoat: 8-10 hours Dry Time: 24 hours Cleanup: mineral spirits Coverage: 200 sq. ft. per quart Coats: 1 coat. To darken the color, apply a second coat after 8-10 hours. Recommended Uses: woodwork, furniture, doors, molding, trim, cabinets, accessories Brand Name: Minwax Sub Brand: Wood Finish Transparency: Transparent Sheen: Low Luster Color: Honey Maple Base Type: Oil-Based Product Type: Gel Stain Container Size: 1 qt. VOC Level: Low VOC g/L Coverage Area: 200 sq. ft. Application: Wood UV Resistant: No Tintable: No Sealer: No Indoor or Outdoor: Indoor and Outdoor Application Method: Cloth, Brush, Foam Applicator Rich, uniform color *Easy-to-use *Non-drip formula

Minwax Wood Oil Stain Semi-Transparent Ebony 1 qt. • Benefits • • Description • • Specification • ✔ Coverage Area: 150 sq ft ✔ In one coat, a deeply penetrating color accentuates the beauty of wood. ✔ It dries in 2 hours and can be stained in one day. ✔ For even color, it resists lapping. ✔ Any naked or stripped wood surface can be transformed into a work of art. ✔ Interior staining of unpainted wood furniture, cabinets, doors, trim, molding, and floors is a breeze with this product. Minwax® Wood Finish® is a penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. It applies easily, absorbs deep into the pores of the wood, and is ideal for staining unfinished wood furniture, cabinets, doors, trim, molding, and hardwood floors. Brand Name: Minwax Sub Brand: Wood Finish Transparency: Semi-Transparent Color: Ebony Base Type: Oil-Based Product Type: Penetrating Wood Stain Container Size: 1 qt Tintable: No Application Method: Brush, Cloth Time Before Recoating: 4 hr VOC Level: Low VOC g/L Coverage Area: 150 sq ft UV Resistant: No Sealer: No Indoor or Outdoor: Indoor Color Family: Black

Minwax Wood Oil Stain Semi-Transparent Simply White 1 qt.   • Benefits • • Description • • Specification • ✔ In one coat, a deeply penetrating color accentuates the beauty of wood. ✔ Coverage Area: 150 sq ft ✔ It dries in 2 hours and can be stained in one day. ✔ For even color, it resists lapping. ✔ Any naked or stripped wood surface can be transformed into a work of art. ✔ Interior staining of unpainted wood furniture, cabinets, doors, trim, molding, and floors is a breeze with this product. Minwax® Wood Finish® is a penetrating oil-based wood stain, which provides beautiful rich color that enhances the natural wood grain. It applies easily, absorbs deep into the pores of the wood, and is ideal for staining unfinished wood furniture, cabinets, doors, trim, molding, and hardwood floors. Brand Name: Minwax Sub Brand: Wood Finish Transparency: Semi-Transparent Color: Simply White Base Type: Oil-Based Product Type: Penetrating Wood Stain Container Size: 1 qt Tintable: No Application Method: Brush, Cloth Time Before Recoating: 4 hr VOC Level: Low VOC g/L Coverage Area: 150 sq ft UV Resistant: No Sealer: No Indoor or Outdoor: Indoor Color Family: White

Minwax Gel Stain Oil-Based Semi-Transparent Mahogany 1 qt. • Benefits • • Description • • Specification • ✔ Easy Application deliverys uniform Color evenly on wood and non-wood surfaces ✔ Stain metal, veneer, and fiberglass! ✔ Dries in Just 8-10 Hours ✔ Covers 200 sq. ft. per Quart Minwax® Gel Stain was created to give you complete control over the staining process and to assist you in achieving stunning results. Its unique non-drip formula makes application easy for vertical surfaces. Colors wood and non-wood surfaces, such as metal, veneer, and fiberglass, in a consistent manner. WOOD PROJECTS: SURFACE PREPARATION: Surface must be dry, clean, and free of dirt, grease, glue, and existing coatings before staining. Sand the wood in the direction of the grain using a fine-grade sandpaper (#220) until smooth. Remove all sanding dust. To help ensure uniform acceptance of stain color and beautiful results, pretreat the wood with Minwax® Pre-Stain Wood Conditioner following label directions. PRODUCT PREPARATION AND COLOR TESTING: Stir Minwax® Gel Stain until creamy before and occasionally during use. Do not thin. Always test stain on a scrap piece or hidden area of the wood to verify desired color. STAIN APPLICATION: Apply a liberal amount of stain evenly with a brush or clean cloth. Wait 3 minutes and remove the excess stain with a clean cloth, wiping in the direction of the grain. Allow to dry 8-10 hours. To darken the color, apply additional coats of Minwax® Gel Stain repeating directions for application of first coat. Allow the stain to dry 8 to 10 hours between coats. Do not sand between coats. CLEAR FINISH APPLICATION: After 24 hours (dry time may be extended due to heavy application, low temperatures or high humidity), complete your project by applying a clear protective finish. Recommended finishes include Minwax® Fast-Drying Polyurethane or Water Based Oil Modified Polyurethane or Helmsman® Spar Urethane for exterior use. FIBERGLASS DOOR PROJECTS: For ease of staining and finishing, it is recommended that you finish the door before installation. PREPARATION: Make sure the door surface is free of all dirt and foreign matter. Stir Minwax® Gel Stain until creamy before use and occasionally during use. STAIN APPLICATION: Using a high quality natural bristle brush, spread a thin, even coat over the entire surface, starting with the raised panel sections. Always make final brush strokes in the direction of the embossed grain. Areas of heavier coats should be evened out before moving to a new section. Allow stain to dry approximately 6 to 8 hours. To darken the color, apply additional coats by following the instructions above. Let the stain dry 6 to 8 hours between coats. CLEAR FINISH APPLICATION: Be sure to apply a clear protective finish such as Minwax® Fast-Drying Polyurethane for interior use or Minwax® Helmsman® Spar Urethane for exterior applications. Before applying a clear finish, test the stain for dryness by wiping a small hidden area with a rag moistened with mineral spirits. If the last coat of stain can be removed with mineral spirits, do not apply a clear protective finish. Wait until the stain is completely dry. Allow the finish to dry at least 6 hours before installing or closing the door to avoid sticking. For exterior applications, apply a coat of clear protective finish every 12-24 months to keep the door looking beautiful. METAL DOOR PROJECTS: SURFACE PREPARATION: You will need: a graining tool, clean, dry, lint-free cloths, and clean, dry synthetic brushes. (Practice with the graining tool on a piece of scrap following the instructions in Step 3 until you feel comfortable using it.) Most metal doors come already primed, but usually not in the color you should be starting with. Select an oil-based base coat tinted to match the light tone in the wood you're trying to create. Then, mask all areas, such as glass, that you do not wish to stain and remove all hardware and doorknobs. Clean the surface with a cloth dampened with mineral spirits to remove all dust, grease and dirt. Apply a thin layer of the base coat paint to the entire door and allow it to dry thoroughly. STAIN APPLICATION: Plan to work on the door in separate vertical and horizontal sections. Mask off the horizontal sections as you work on the vertical sections. The vertical sections need to be masked off when working on the horizontal sections. Each section must be completely dry before either removing or applying masking tape. Select a Minwax® Gel Stain color that corresponds to the darkest color of the wood grain you are trying to create. Test stain on hidden area to verify desired color. Apply a thin, even coat of Gel Stain to a section using a natural bristle brush or a soft, lint-free cloth. Apply in the direction of the grain you intend to create. GRAINING: While the Gel Stain is wet, use a graining tool to create a wood grain pattern. Apply downward pressure while moving the graining tool across the section at a constant speed. Use a long, steady, non-stop stroke -- rocking the tool one rotation as you move from beginning to end. Keep the graining tool clean by wiping it often with a rag or paper towel between strokes. Repeat the above steps section by section. Not satisfied? Either wipe the surface clean or re-brush the area and start over again. Wet or tacky Gel Stain can be removed easily with a rag moistened with mineral spirits. To complete the graining process, wait until the first coat of Minwax® Gel Stain is completely dry (24-48 hours), then apply a second coat of Gel Stain with a natural bristle brush in the direction of the grain pattern created. Work section by section as you did before. There is no need to mask off any sections. While the Gel Stain is wet, you’ll want to use a clean, dry synthetic brush to remove the excess stain and create a uniform look. Use long brush strokes in the direction of the grain and remove the Gel Stain from the brush as it begins to accumulate with paper towels or a rag. The amount of Gel Stain left on will determine the depth of color. Helpful Hints: On metal doors, use masking tape to mask off areas where sections meet. Let the section dry to the touch before working on a section next to it. This ensures a clean, straight edge where panels meet. COVERAGE: Approximately 200 sq. ft. per quart. CLEANUP: Use mineral spirits or paint thinner. DANGER: Rags, steel wool, other waste soaked with this product, and sanding residue may spontaneously catch fire if improperly discarded. Immediately place rags, steel wool, other waste soaked with this product, and sanding residue in a sealed, water-filled, metal container. Dispose of in accordance with local fire regulations. CAUTIONS: CONTAINS ALIPHATIC HYDROCARBONS. Contents are COMBUSTIBLE. Keep away from heat and open flame. VAPOR HARMFUL. Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. FIRST AID: In case of eye contact, flush thoroughly with large amounts of water for 15 minutes and get medical attention. For skin contact, wash thoroughly with soap and water. In case of respiratory difficulty, provide fresh air and call physician. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. DELAYED EFFECTS FROM LONG TERM OVEREXPOSURE. Contains solvents which can cause permanent brain and nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents can be harmful or fatal. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN. CONFORMS TO ASTM D-4236. Contact a physician for more health information. Brand Name: Minwax Sub Brand: Wood Finish Transparency: Transparent Sheen: Low Luster Color: Mahogany Base Type: Oil-Based Product Type: Gel Stain Container Size: 1 qt. Tintable: No Indoor or Outdoor: Indoor and Outdoor Coverage Area: 200 sq. ft. Sealer: No Application: Wood VOC Level: Low VOC g/L Application Method: Cloth, Brush, Foam Applicator UV Resistant: No Rich, uniform color *Easy-to-use *Non-drip formula

Minwax Pre-Stain Wood Conditioner Water Based 1 qt. • Benefits • • Description • • Specification • ✔ White wash pickling helps control the effect of grain raising on soft and hardwoods and promotes uniform penetration. ✔ Use on all types of hard and Soft woods ✔ FAST, 1-5 min dry time! Minwax® Water Based Pre-Stain Wood Conditioner helps limit the effect of grain rising on both soft and hard woods by promoting consistent penetration of Minwax® Water Based Wood Stain and Minwax® White Wash Pickling Stain. To prepare for staining, use as the initial step in any water-based stain project on any type of wood.   Water-based pre-stain wood conditioner reduces blotching and streaking, resulting in a stunning, even stain color. Directions Instrucciones en Español (For Interior Use Only) WARNING! Removal of old paint by sanding, scraping or other means may generate dust or fumes that contain lead. Exposure to lead dust or fumes may cause brain damage or other adverse health effects, especially in children or pregnant women. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment such as a properly fitted respirator (NIOSH approved) and proper containment and cleanup. For more information, call the National Lead Information Center at 1-800-424-LEAD (in US) or contact your local health authority. Surface must be dry, clean, and free of dirt, grease, glue, and any existing coatings before staining. Sand the wood in the direction of the grain, first using medium-grade sandpaper (#120) working your way to fine-grade sandpaper (#220). Do Not Use Steel Wool. Remove all sanding dust. Stir contents thoroughly before use. Do not apply when temperature is below 55°F. Do not thin. Apply Minwax® Water Based Pre-Stain Wood Conditioner with a synthetic bristle brush, foam brush or clean cloth. Allow to penetrate 1-5 minutes. Remove excess with a clean cloth. Do not allow product that has not penetrated the wood to dry on the wood surface. After 15-30 minutes, lightly sand the surface with fine-grade sandpaper (#220) to smooth any raised grain. Remove all sanding dust. Surface is now ready for staining with Minwax® Water Based Wood Stain. COVERAGE: approximately 100-125 square feet per quart. CLEANUP: soap and warm water. CAUTIONS: Use only with adequate ventilation. To avoid overexposure, open windows and doors or use other means to ensure fresh air entry during application and drying. If you experience eye watering, headaches, or dizziness, increase fresh air, or wear respiratory protection (NIOSH approved) or leave the area. Avoid contact with eyes and skin. Wash hands after using. Keep container closed when not in use. Do not transfer contents to other containers for storage. FIRST AID: In case of eye contact, flush thoroughly with large amounts of water. Get medical attentional if irritation persists. If swallowed, call Poison Control Center, hospital emergency room, or physician immediately. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. DO NOT TAKE INTERNALLY. KEEP OUT OF THE REACH OF CHILDREN. CONFORMS TO ASTM D-4236. Contact a physician for more health information. Brand Name: Minwax Sub Brand: Water-Based Pre-Stain Wood Conditioner Base Type: Water-Based Product Type: Pre-Stain Wood Conditioner Container Size: 1 qt Application Method: Brush/Cloth Coverage Area: 100-125 sq ft Indoor or Outdoor: Indoor Paintable: Yes Clean up: Soap and Water

Rust-Oleum Spray Paint Hunter Green Gloss 12 oz. • Benefits • • Description • • Specification • ⮞ Save time and money with Double Coverage Technology! ⮞ Paint and Primer mixed into one easy-to-use can! ⮞ Hunter Green with a Gloss finish Rust-Oleum Painter's Touch 2X Ultra Cover Gloss Spray Paint gives your interior or exterior objects a quick refresh or coat with maximum coverage. Double Cover technology saves time and energy, allowing you to finish jobs more quickly. With effortless application from any direction, the any-angle spray with comfort tip eliminates finger fatigue. Spray light applications within an hour to avoid wrinkling, then let dry for 48 hours before applying a topcoat. Brand Name: Rust-Oleum Sub Brand: Painter's Touch 2X Ultra Cover Sheen: Gloss Color: Hunter Green Product Type: Paint + Primer Spray Paint Container Size: 12 oz Coverage Area: 8-12 sq ft Inverted Spray Ability: Yes Primer Required: No Time Before Recoating: 1 hr UV Resistant: Yes Indoor or Outdoor: Indoor and Outdoor Clean Up: Mineral Spirits Color Family: Green Recommended Surface: Plastic, Metal, Wood and More Mildew Resistant Finish: No Container Type: Aerosol Can Dry to Touch: 20 min

Dap Advanced Gutter & Flashing Sealant 10.1 oz.   • Benefits • • Description • • Specification • ✔️VOC compliant ✔️ 100% waterproof & weatherproof ✔️ Extreme temperature application range: 20°F - 120°F ✔️ Wet/damp surface adhesion ✔️ Shrink & crack proof ✔️ Flexible ✔️ Low odor Safety Data Sheet  Advanced, single component sealant with virtually no VOCs (<1%) for gutter and flashing applications. Butyl rubber formula provides a durable, flexible, watertight seal for gutters, drain spouts, lap joints, flashings, roof vents, aluminum siding and other metal joints. Stands up to weather and temperature extremes. Brand Name: DAP Color: Gray Material: Polymer Product Type: Sealant Container Size: 10.1 oz Coverage Area: 55 linear ft Paintable: Yes VOC Level: Zero VOC g/L Moisture Resistant: Yes Fire and High Heat Resistant: No Permanently Flexible: Yes Packaging Type: Cartridge Color Family: Gray Indoor or Outdoor: Indoor and Outdoor Durability: Lifetime Guarantee Mildew Resistant: Yes

Benjamin Moore Ultra Spec 500 Interior Primer • Benefits • • Description • • Specification • ✔ Excellent hiding ✔ Spatter resistant ✔ Zero VOC ✔ Low odor ✔ Eligible for LEED® v4 credit ✔ Quick dry ✔ Easy application ✔ Soap and water clean up ✔ MPI Approved A professional-quality interior waterborne primer based on a proprietary acrylic resin. Eligible for LEED® v4 credit and passes the most stringent environmental standards. ✔ Recommended for ✔ Interior wall and ceiling surfaces in commercial and institutional environments. For new or previously painted interior wallboard, cured masonry, cured plaster and non-bleeding woods. Also can be used on primed or previously painted metal in addition to under wallcoverings for easy positioning and removal. Available Colors: White Sheen (or Gloss): Primer Cleanup: Soap and Water Resin Type: Acrylic Copolymer Recommended Use: Interior MPI Rating: 50 VOC Level: 0.0

Gorilla Super Glue Gel 15 gram. • Benefits • • Description • • Specification • 🦍 ANTI-CLOG CAP: Keeps Gorilla Glue from drying out 🦍 TOUGH IMPACT: Strengthen and increase impact resistance. 🦍 FAST-SETTING: Dries in 10-45 seconds without the need for clamping. 🦍 VERSATILE: Bonds a variety of materials including plastic*, wood, metal, porcelain, rubber, leather, paper, and more! Gorilla Super Glue Gel is a thicker, more controlled formula* that works well on a variety of surfaces and in vertical applications. The clear adhesive is designed to make long-lasting repairs in a matter of seconds and cures in 10–45 seconds. This super adhesive gel was created with the purpose of absorbing drops and impacts. Super glue, commonly known as cyanoacrylate glue or CA glue, adheres to a wide range of surfaces, including plastic**, metal, stone, ceramic, paper, rubber, and more. We've included an anti-clog cap with a metal pin inside to ensure an airtight seal for optimal reusability, in addition to the high-performance formula. Every time, it's Gorilla challenging. Brand Name: Gorilla Adhesion Strength: High Strength Product Type: Super Glue Container Size: 15 gm Packaging Type: Tube Solvent Resistant: No Indoor or Outdoor: Indoor Flammable: No Full Cure Time: 24 hr Working Time: 0 min Product Form: Gel

Benjamin Moore Ultra Spec 500 Interior Semi-Gloss • Benefits • • Description • • Specification • •Excellent concealment • Resistant to Splattering • Excellent characteristics for touch-ups • Semi-Gloss finish that is both decorative and consistent. • Cleaning with soap and water • There are no VOCs. • LEED credit is available. • Washable • Quick to dry • Odorless • Application is simple. • Superior leveling and flow Interior waterborne Semi-Gloss finish made with a patented cross-linking acrylic resin that colors using the Gennex® zero VOC colorant system. This waterborne interior Semi-Gloss is easy to clean because of its excellent stain release. In every hue, the product qualifies for LEED® v4 credit and meets the most demanding environmental criteria. All Ultra Spec® 500 finishes are available in any hue without an increase in VOC since they are tinted with our Gennex® waterborne colorant system. LEED® v4 credit is available for this product. meets or exceeds the most demanding environmental criteria in the world color. Because it tints our waterborne colorant Gennex All Ultra Spec® 500 finishes come in a variety of colors. without a rise in VOC levels Available Colors: White and 1X, 2X, 3X, 4X bases Sheen (or Gloss): Semi-Gloss Cleanup: Soap and Water Resin Type: Acrylic Copolymer Recommended Use: Interior MPI Rating: 54,141,147 VOC Level: 0.0 Vehicle Type Acrylic Copolymer Pigment Type Titanium Dioxide Volume Solids 37.9 ± 2% Coverage per Gallon at Recommended Film Thickness 350 – 400 sq. ft. Recommended Film Thickness – Wet 3.9 – 4.2 mils – Dry 1.5 – 1.7 mils Depending on surface texture and porosity. Be sure to estimate the right amount of paint for the job. This will ensure color uniformity and minimize the disposal of excess paint. Dry Time @ 77 °F (25 °C) @ 50% RH – To Touch 2 Hours – To Recoat 4 Hours Painted surfaces can be washed after two weeks. High humidity and cool temperatures will result in longer dry, recoat and service times. Dries By Coalescence Viscosity 93 ± 3 KU Flash Point N/A Gloss / Sheen Semi-Gloss (45 – 55 @ 60°) Surface Temperature at Application – Min. 50 °F – Max. 90 °F Thin With See Chart Clean Up Thinner Clean Water Weight Per Gallon 11 lbs Storage Temperature – Min. 40 °F – Max. 90 °F

Benjamin Moore Ultra Spec 500 Interior Paint Satin/Pearl • Benefits • • Description • • Specification • • Superior concealment • Spatter-proof and VOC-free • Low-odor • LEED® v4 credit is available • Fast drying time • Simple Application • Easy Clean up with soap and water • Approved by the MPI Interior waterborne satin/pearl finish based on a unique cross-linking acrylic resin that colors using the Gennex® zero VOC colorant system for a professional look. This kind of waterborne Interior satin/Pearl is stain-resistant and easy to clean LEED® v4 credit is available for this product. meets or exceeds the most demanding environmental criteria in the world color. Because it tints our waterborne colorant Gennex All Ultra Spec® 500 finishes come in a variety of colors. without a rise in VOC levels Available Colors: White and 1X, 2X, 3X, 4X bases Sheen (or Gloss): Satin Cleanup: Soap and Water Resin Type: Acrylic Copolymer Recommended Use: Interior MPI Rating: 43,140,146 VOC Level: 0.0