Cabot Semi-Solid Oil-Based Deck and Siding Stain Neutral Base 1 gal. • Benefits • • Description • • Specification • • Highlight Enhance and protect the natural beauty of wood while adding a touch of color • Manufactured for increased durability • Oil-Based, Water Repellent • Useful for fence, siding, and decks • Excellent UV protection with a deep penetrating semi-solid finish • Resistant to scuffing and fading • LOW VOC • One coat Exterior Application Richly colored, deeply penetrating, oil-based Cabot® Semi-Solid Stain & Sealer Low VOC offers wood protection and long-lasting beauty. Compared to semi-transparent stains, this particular stain has more concealing power, yet its appealing finish brings out the texture's inherent attractiveness. Semi-Solid Deck Features Cabot Semi-Solid Deck & Siding Stains are deep penetrating linseed oil-based stains that provide long lasting beauty and wood protection, highlight the natural beauty of the wood's texture with a uniquely pigmented appearance. With their extra pigmentation, Cabot deck and siding stains are extremely durable and help protect wood against the sun's damaging ultraviolet rays. Coverage Spread rates will vary depending on the porosity of the surface. On smooth surfaces, 1400 series covers approximately 400-500 square feet per gallon, 17400 series covers approximately 250-350 square feet per gallon. Where to Use Cabot Semi-Solid Deck & Siding Stains are ideal for use on wood where hiding coverage is desired, yet penetrating wood protection is needed. They also provide an outstanding value as a one-coat finish for recoating previously semi-transparent-stained surfaces. Cabot Semi-Solid Deck & Siding Stains can be used on most types of smooth and rough exterior wood, including decks, siding, fences, log homes and roofs. They provide excellent results on weathered wood and well-seasoned lumber such as cedar, fir, pine, cypress, spruce, redwood and plywood panel siding. Preparing Your Surfaces Proper surface preparation is the key to maximum stain performance. The durability of this product can be impaired by an unsound or poorly prepared surface. It is very important that the surface be clean of all dirt, mildew stains, loose wood fibers and other foreign matter. In order to be effective, a stain must be able to penetrate. Surfaces must be structurally sound and absolutely dry. (Moisture content must be below 15%, or wood must be exposed to dry weather a minimum of 3 to 5 days.) Previously semi-transparent stained or weathered wood surfaces must be either sanded, scrubbed with a detergent solution or Cabot Problem-Solver® Wood Cleaner and a stiff bristle brush, or power washed to remove the surface layer of all loose wood fibers, dirt, mildew stains, chalky residue and other foreign matter. Use Cabot Problem-Solver Strippers (8004) to safely remove all stains and paints from wood surfaces. Use Cabot Problem-Solver Wood Brightener to easily remove nail and metal rust stains, and renew the wood's appearance. New smooth wood that is unseasoned or appears shiny should be allowed to weather sufficiently before staining, but generally no longer than three months. Application Stir thoroughly before and occasionally while using. If the job requires more than one batch, blend them together. Apply evenly with a brush to small sections. For best results, use a high quality pad applicator or stain brush. To avoid lap marks, start at one edge and follow through to the end of the boards. Restain depending on sun exposure and wear every 2-4 years (up to 1 year for Clear). Cleanup and Disposal 1400 series: Clean brushes and equipment with mineral spirits 17400 series: Before drying, clean brushes and equipment with soap and water. Use mineral spirits after drying. Dispose of empty cans or unused portion in accordance with local, state and federal regulations. Close container when not in use. Danger: Rags, steel wool or waste soaked with this product may spontaneously catch fire if improperly discarded. Immediately after each use, place rags, steel wool or waste in a sealed, water-filled metal container. Dispose of according to local regulations. Brand Name: Cabot Sub Brand: Low VOC Transparency: Semi-Solid Tintable: Yes Color: Neutral Base Base Type: Oil-Based Product Type: Deck and Siding Stain Container Size: 1 gal UV Resistant: Yes Application Method: Brush/Pad/Spray Water Repellent: Yes VOC Level: 250 g/L Sealer: Yes Coverage Area: 250-350 sq ft Recommended Surface: Deck/Siding/Fence Full Cure Time: 48 hr Color Family: Tintable Base Clean up: Soap and Water Technical Data Sheet

Cabot O.V.T. Solid Tintable Oil-Based Stain 1 gal. • Benefits • • Description • • Specification • ✔️ Protects and Enhances the Natural Beauty of Wood ✔️ Oil-based and for maximum coverage, it's heavily pigmented. ✔️ Unlimited amounts of color matching Cabot O.V.T. solid color oil stains combine the greatest aspects of stain and paint in one product. These stains are made up of a combination of strong alkyd resin and linseed oil, and they provide excellent hiding power while also resisting cracking, peeling, and blistering. They give a water-repellent and long-lasting finish that keeps moisture out of the wood, reducing warping and checking. These stains protect new wood or already stained surfaces for a long time. Brand Name: Cabot Sub Brand: O.V.T. Transparency: Solid Tintable: Yes Color: 6701 White Base Base Type: Oil-Based Product Type: Stain Container Size: 1 gal UV Resistant: No Durability: 5 Years yr Application Method: Brush/Roller/Spray Water Repellent: Yes VOC Level: 250 g/L Sealer: Yes Coverage Area: 200-500 sq ft Recommended Surface: Finished Wood Full Cure Time: 30 day Color Family: Tintable Base

Cabot Semi-Transparent Redwood Oil-Based Penetrating Oil Deck and Siding Stain 1 gal. Wood stains or finishes are meant to be exposed to an outdoor environment, typically used for protecting wood siding or decking materials. Brand Name: Cabot Transparency: Transparent Color: Pacific Redwood Base Type: Oil-Based Coating Material: Penetrating Oil Product Type: Deck and Siding Stain Container Size: 1 gal. Water Repellent: Yes Coverage Area: 200-600 sq. ft. Sealer: Yes VOC Level: 550 g/L Full Cure Time: 30 day Recommended Surface: Decks Application Method: Brush/Roller/Spray Durability: 3 Years

Cabot Semi-Solid Stain White 0101 1 gal. Disc

Cabot Solid Tintable Oil-Based Deck Stain 1 gal. Oil-based, and acrylic water-based formulas available Richly pigmented for extra UV protection Ideal for decks, fencing, and patios The scuff-resistant finish made to be walked on Acrylic #1800 series requires two-coat application Oil series #1600 and #7600 recommend the one-coat application Not recommended for siding or incense cedar Unlimited color matching Do not thin Not intended for interior surfaces Cabot® Solid Color Decking Stains are extremely durable exterior stains for use on all wood decking, outdoor furniture, and fencing, as well as cement patios and walkways. Series #1800, 100% acrylic finish is also water repellent and fades resistant. Oil Series #1600 and #7600 contain all-natural pigment with 100% alkyd resin. Solid Color Stains provide excellent adhesion to new, previously stained or painted surfaces, which are in a clean, sound condition. Approximately 150-250 square feet per gallon for Acrylic Series #1800. Oil Series #1600 and #7600 cover 400-500 sq. ft. per gallon on smooth surfaces; 250-350 sq. ft. per gallon on rough surfaces. These rates will vary depending upon the porosity and type of surface. Spread rates will increase when applying a second coat. Solid Color Decking Stains are ideal for use on most types of lumber including redwood, cypress, pine and fir, as well as pressure-treated wood. Oil decking stains #1600 and #7600 are also excellent for mahogany, cambara, meranti, and other exotic wood species. *Colors might not be exact due to screen resolution

Cabot Semi-Transparent Stain 0307 Deep Base Gallon. Cabot Semi-Transparent 0307 Deep Base Stain - Discontinued 

Cabot Deck Stain Solid Tintable Water-Based Acrylic Quart • Benefits • • Description • • Specification • • Quality and Durable acrylic water-based formula • Richly pigmented for extra UV protection • Ideal for decks, fencing, and patios • The scuff-resistant finish made to be walked on • Acrylic #1800 series requires two-coat application • Not recommended for siding or incense cedar • Unlimited color matching • Do not thin • Not intended for interior surfaces Cabot® Solid Color Decking Stains are extremely durable exterior stains for use on all wood decking, outdoor furniture, and fencing, as well as cement patios and walkways. Series #1800, 100% acrylic finish is also water repellent and fades resistant. Oil Series #1600 and #7600 contain all-natural pigment with 100% alkyd resin. Solid Color Stains provide excellent adhesion to new, previously stained or painted surfaces, which are in a clean, sound condition. Coverage Approximately 150-250 square feet per gallon for Acrylic Series #1800. Oil Series #1600 and #7600 cover 400-500 sq. ft. per gallon on smooth surfaces; 250-350 sq. ft. per gallon on rough surfaces. These rates will vary depending upon the porosity and type of surface. Spread rates will increase when applying a second coat. WHERE TO USE Solid Color Decking Stains work well on a variety of woods, including redwood, cypress, pine, and fir, as well as pressure-treated hardwood. Mahogany, cambara, meranti, and other exotic wood species respond well to oil decking stains #1600 and #7600. Brand Name: Cabot Transparency: Solid Tintable: Yes Color: White Base Base Type: Water-Based Coating Material: Acrylic Product Type: Deck Stain Container Size: 1 qt Time Before Recoating: 4-6 hr UV Resistant: Yes Durability: 10 Years Application Method: Brush/Pad/Spray Water Repellent: Yes VOC Level: 100 g/L Coverage Area: 150-250 sq ft Recommended Surface: Decks Full Cure Time: 24 hr Color Family: Tintable Base Clean Up: Soap and Water

Cabot Straight Stain Brush 4 in. • Benefits • • Description • • Specification • ✔️100% Natural Bristle ✔️ Perfect for Use With Cabot Stains ✔️ 4 inch wide, covers most decking width   Are you looking for the best stain brush for your Cabot Stain? Look no further, This natural bristle stain brush has a threaded handle for the extension pole. Designed specifically for providing a fine, smooth finish with oil paints, stains, varnishes, shellacs, lacquers. When It's Time to Stain your deck or siding, pick up a Cabot Straight Stain Brush 4 in. Brand Name: Cabot Bristle Width: 4 in. Bristle Edge Shape: Straight Product Type: Stain Brush Designed for Use With: Finished Wood Surfaces Number in Package: 1 pk Handle Material: Plastic Packaging Type: Sleeve Bristle Material: Natural Bristle Blended bristles Threaded handle