Cabot Transparent Cedar Oil Deck and Siding Stain 1 gal.

Cabot Transparent Cedar Oil Deck and Siding Stain 1 gal.

• • Benefits •
• • Description •
• • Specification •

• • Keep the natural beauty of the wood and wood grain while protecting it from the elements leaving a flat, clear cedar tone
  

  • Deep Penetrating waterproofer

  • Dual Action UV protection

  • Mildew & Algae resistant coating

  Coverage: Approximately100-250 sq. ft. (9.3-23.2 m2) per gallon.

• Cabot® Wood Toned Stain & Sealer Low VOC is made with a particular combination of resin and oil to give bare wood a superb, natural finish. Cabot Wood Toned Stain is easy to apply and gently darkens wood when initially applied, leaving a flat, translucent-toned finish that weathers to a natural wood color over time. Only for decks, siding, fences, and trim made of new or refurbished external wood. Also works well on shingles, shakes, and log cabins.
  

  Where to Apply

  Cabot Clear Wood Protector is ideal for use on new or refinished wood decks, porches, outdoor furniture, steps, and railings. Stone, masonry, brick, and concrete are also acceptable.

  Preparing your surface

  Check for dirt, mildew stains, loose wood fibers, and other foreign substances on the surface. The substance must be able to permeate in order to be effective. Surfaces must be stable and dry or wet. If the wood is moist, it should be clear of puddles and not feel damp. Cabot® Wood Cleaner, Wood Brightener, or Wood Strippers can be used to clean previously discolored or aged surfaces. Scrubbing with a firm bristle brush or sanding may be necessary to remove all loose wood fibers from untreated aged surfaces.

  Application

  Brushes, stain pads, a low-pressure garden sprayer, or professional spray equipment can be used. Always quickly back-brush after spraying. Always complete a small test area before proceeding to guarantee the correct look and drying time. Before and during use, vigorously shake and whisk. If the project calls for more than one container, mix them all together to maintain consistency. Depending on exposure, reapply every 1-2 years. When standing or walking on surfaces that are still damp after applying Cabot Clear Wood Protector, exercise caution since the surface may be slippery.

  Cleanup and Disposal

  Clean brushes and equipment with soap and water. Dispose of empty cans or unused portion in accordance with local, state and federal regulations.

• Brand Name: Cabot

  Sub Brand: Wood Toned Stain & Sealer Low VOC

  Transparency: Transparent

  Tintable: No

  Color: Cedar

  Base Type: Oil-Based

  Product Type: Deck and Siding Stain

  Container Size: 1 gal

  UV Resistant: No

  Durability: 3 Years

  Application Method: Brush/Sprayer

  Water Repellent: Yes

  VOC Level: 250 g/L

  Sealer: Yes

  Coverage Area: 250-350 sq ft

  Recommended Surface: Deck/Siding

  Full Cure Time: 24 hr

  Color Family: Brown

  Clean Up: Soap and Water

  Safety Data Sheet Here