Cabot Crystal Clear Water-Based Waterproofer Wood Protector 1 gal.

• Benefits • • Description • • Specification • • Use a natural bristle brush, a lambswool applicator, or a spray to apply. • Perfect for hardwood floors, cabinets, furniture, bar tops, doors, and woodwork. • Self-leveling and smooth • Oil Based Coats: 2, 3 coats recommended for floors Clean Up: Mineral spirits Coverage: 500 – 600 square feet per gallon Dry Time: 2 hours, 4 – 6 hours final coat ZAR Base Interior Oil Poly is an oil-based polyurethane that dries very quickly and leaves a smooth finish on bare wood in just two hours. There are no brush marks. It has a tough finish that won't wear away and self-leveling properties, so it works well on hardwood floors, cabinets, furniture, and other woodwork. Brand Name: ZAR Sheen: Matte Color: Clear Base Type: Oil-Based Product Type: Polyurethane Container Size: 1 qt Time Before Recoating: 2 hr UV Resistant: No VOC Level: 510 g/L Coverage Area: 125 - 150 sq ft Full Cure Time: 6 hr Indoor or Outdoor: Indoor Color Family: Clear Application Method: Brush Clean Up: Paint Thinner or Mineral Spirits

• Benefits • • Description • • Specification • • Allows Natural beauty of Wood Grain Texture can be seen while adding a slight hint of color • Provides long-lasting protection and durability while safeguarding the wood surface • Long-term color retention resists fading and peeling • Offers defense against UV radiation, wetness, and mildew • Use on all types of wood decks, siding, fencing, shakes, and exterior surfaces. • An ideal choice for softwoods like cedar and pines and pressure-treated lumber • Apply to new, or weathered wood or to previously stained wood • Available in 75 brilliant colors If you want to preserve and enhance the natural beauty of your wood deck, siding, fencing, shakes, or other exterior surfaces, Benjamin Moore's Arborcoat Waterborne Semi-Transparent Exterior Deck & Siding Stain is the best option. The natural wood grain can be seen through Arborcoat's semi-transparent finish while still adding a tiny bit of color. This means that you get to enjoy the natural beauty of the wood grain texture while also adding a touch of color to your wood surfaces. This stain not only offers a stunning finish, but also provides unmatched defense against UV rays, moisture, and mildew. Your wood deck, siding, fencing, shakes, and exterior surfaces will look great for years to come because it is specially formulated to provide long-term color retention to wood surfaces. Arborcoat Waterborne Semi-Transparent Exterior Deck & Siding Stain can be used on all types of wood, including pressure-treated lumber and softwoods like cedar and pine. It is a flexible option for any project because it can be applied to fresh or aged wood as well as wood that has already been stained. You're sure to find the ideal match for the exterior of your home among the 75 brilliant colors available. Never accept an exterior stain that doesn't offer adequate protection. For a tough, long-lasting finish that not only looks great but also shields your wood surfaces for years to come, Benjamin Moore's Arborcoat Waterborne Semi-Transparent Exterior Deck & Siding Stain ready to be mixed today at Gilford Hardware & Outdoor Power Equipment Available Colors: 75 Colors Sheen (or Gloss): Flat Cleanup: Soap and Water Resin Type: Acrylic/Alkyd/Urethane Blend Recommended Use: Exterior MPI Rating: 156 VOC Level: 18.3 Technical Data Sheet

Minwax Transparent White Wash Water-Based Wood Pickling Stain 1 qt. • Benefits • • Description • • Specification • • Add a touch of transparent white wash to your next DIY project! • Water-based, easy clean-up with just soap and water • Coverage Area: 100 sq ft Minwax Color Wash is a water-based, transparent layering stain that adds a touch of age and character to bare and already-stained wood. Layer over any oil- or water-based stain for extra depth and interest. Ideal for small projects, furniture, cabinets, doors and trim. Brand Name: Minwax Sub Brand: Design Series Color Wash Transparency: Transparent Color: White Wash Base Type: Water-Based Product Type: Wood Stain Container Size: 1 qt Tintable: No Application Method: Synthetic Foam/Foam Brush/Rag Time Before Recoating: 1 hr Coverage Area: 100 sq ft UV Resistant: No Sealer: No Indoor or Outdoor: Indoor Color Family: White Cleanup: Soap and Water

Cabot Semi-Solid Oil-Based Deck and Siding Stain Neutral Base 1 gal. • Benefits • • Description • • Specification • • Highlight Enhance and protect the natural beauty of wood while adding a touch of color • Manufactured for increased durability • Oil-Based, Water Repellent • Useful for fence, siding, and decks • Excellent UV protection with a deep penetrating semi-solid finish • Resistant to scuffing and fading • LOW VOC • One coat Exterior Application Richly colored, deeply penetrating, oil-based Cabot® Semi-Solid Stain & Sealer Low VOC offers wood protection and long-lasting beauty. Compared to semi-transparent stains, this particular stain has more concealing power, yet its appealing finish brings out the texture's inherent attractiveness. Semi-Solid Deck Features Cabot Semi-Solid Deck & Siding Stains are deep penetrating linseed oil-based stains that provide long lasting beauty and wood protection, highlight the natural beauty of the wood's texture with a uniquely pigmented appearance. With their extra pigmentation, Cabot deck and siding stains are extremely durable and help protect wood against the sun's damaging ultraviolet rays. Coverage Spread rates will vary depending on the porosity of the surface. On smooth surfaces, 1400 series covers approximately 400-500 square feet per gallon, 17400 series covers approximately 250-350 square feet per gallon. Where to Use Cabot Semi-Solid Deck & Siding Stains are ideal for use on wood where hiding coverage is desired, yet penetrating wood protection is needed. They also provide an outstanding value as a one-coat finish for recoating previously semi-transparent-stained surfaces. Cabot Semi-Solid Deck & Siding Stains can be used on most types of smooth and rough exterior wood, including decks, siding, fences, log homes and roofs. They provide excellent results on weathered wood and well-seasoned lumber such as cedar, fir, pine, cypress, spruce, redwood and plywood panel siding. Preparing Your Surfaces Proper surface preparation is the key to maximum stain performance. The durability of this product can be impaired by an unsound or poorly prepared surface. It is very important that the surface be clean of all dirt, mildew stains, loose wood fibers and other foreign matter. In order to be effective, a stain must be able to penetrate. Surfaces must be structurally sound and absolutely dry. (Moisture content must be below 15%, or wood must be exposed to dry weather a minimum of 3 to 5 days.) Previously semi-transparent stained or weathered wood surfaces must be either sanded, scrubbed with a detergent solution or Cabot Problem-Solver® Wood Cleaner and a stiff bristle brush, or power washed to remove the surface layer of all loose wood fibers, dirt, mildew stains, chalky residue and other foreign matter. Use Cabot Problem-Solver Strippers (8004) to safely remove all stains and paints from wood surfaces. Use Cabot Problem-Solver Wood Brightener to easily remove nail and metal rust stains, and renew the wood's appearance. New smooth wood that is unseasoned or appears shiny should be allowed to weather sufficiently before staining, but generally no longer than three months. Application Stir thoroughly before and occasionally while using. If the job requires more than one batch, blend them together. Apply evenly with a brush to small sections. For best results, use a high quality pad applicator or stain brush. To avoid lap marks, start at one edge and follow through to the end of the boards. Restain depending on sun exposure and wear every 2-4 years (up to 1 year for Clear). Cleanup and Disposal 1400 series: Clean brushes and equipment with mineral spirits 17400 series: Before drying, clean brushes and equipment with soap and water. Use mineral spirits after drying. Dispose of empty cans or unused portion in accordance with local, state and federal regulations. Close container when not in use. Danger: Rags, steel wool or waste soaked with this product may spontaneously catch fire if improperly discarded. Immediately after each use, place rags, steel wool or waste in a sealed, water-filled metal container. Dispose of according to local regulations. Brand Name: Cabot Sub Brand: Low VOC Transparency: Semi-Solid Tintable: Yes Color: Neutral Base Base Type: Oil-Based Product Type: Deck and Siding Stain Container Size: 1 gal UV Resistant: Yes Application Method: Brush/Pad/Spray Water Repellent: Yes VOC Level: 250 g/L Sealer: Yes Coverage Area: 250-350 sq ft Recommended Surface: Deck/Siding/Fence Full Cure Time: 48 hr Color Family: Tintable Base Clean up: Soap and Water Technical Data Sheet