⚠️ WARNING! Improper use of any trimmer/brushcutter can cause serious or fatal injury. Read, understand and follow all safety instructions in your instruction manual. To reduce the risk of injury from blade contact, circular saw blades may be used on FS brushcutters that have a limitstop, a bicycle handle and double shoulder harness and not on FS brushcutters with a "J" handle or loop handle. Other rigid blades may be used on FS brushcutters having a bicycle handle, a "J" handle or a loop handle equipped with a barrier bar. To reduce the risk of eye injury always wear proper eye protection. Always use the appropriate deflector for the type of cutting attachment, as explained in your instruction manual.
🖊️ Note: STIHL recommends use of fuel with no more than 10% Ethanol content. Using fuel with greater than 10% Ethanol content may cause damage to your equipment and may void your STIHL warranty. Note:STIHL engine products with the Caring for Nature logo are cleaner than EPA Standards for exhaust emissions.
⚠️ WARNING! Improper use of any power tool may cause serious or fatal injury. Read, understand and follow carefully the operating and safety instructions in your instruction manual before using such products.
STIHL products sold through U.S. STIHL Dealers are for distribution in the United States only. Click here to view STIHL Product Manuals
STIHL TS 410 STIHL Cutquik® Cut-Off Saw
X2 air filtration and anti-vibration system make this cut-off machine easy to use and maintain.
There are no easy jobs in the construction and deconstruction business, but when it comes to cutting performance there is one easy choice: the TS 410 STIHL Cutquik® cut-off machine with a 12" cutting wheel. Featuring the X2 air filtration system and an anti-vibration system, this cut-off machine is comfortable to use and easy to maintain. Thanks to patented advancements, the TS 410 keeps working longer than the legendary TS 400 — helping you stay on schedule.
• Caring for Nature •
The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
• IntelliCarb™ Compensating Carburetor •
The IntelliCarb™ Compensating Carburetor is designed to automatically adjust the air/fuel ratio when the air filter becomes restricted or partially clogged and maintains the engine’s correct RPM. IntelliCarb™ uses air from the clean side of the air filter to control the diaphragm and flow of fuel. As the air filter becomes dirty and less air is available for the carburetor, the IntelliCarb™ system adjusts the fuel flow to compensate for the decrease in air flow. This is in contrast to typical carburetors that utilize this air from the “dirty” side of the air box.
• X2 Air Filtration System •
The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
• Bayonet-Style Fuel Cap •
Includes retainer for easy use, even with gloves on.
• Semi-Automatic Belt Tensioning •
With consistent semi-automatic re-tensioning, this feature increases the service life of the belts and shaft bearings.
• Anti-Vibration System •
STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
• STIHL ElastoStart™ •
The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
• Ergonomic Grip •
The ergonomic top-handle bar design provides an optimal comfortable grip in any working position.
• Water Connection •
Water connection with shut-off valve and quick connector.
TS 410 STIHL Cutquik® Specifications
DISPLACEMENT 66.7 cc (4.07 cu. in.)
ENGINE POWER 3.2 kW (4.4 bhp)
WEIGHT* 9.4 kg (20.7 lbs.)
FUEL TANK CAPACITY 710 cc (24 oz.)
ENGINE SPEED 9,000 rpm (Elec. Gov.)
MAXIMUM SPINDLE SPEED 5,350 rpm
ARBOR SIZE 20 mm
MAXIMUM WHEEL SIZE 300 mm (12")
MAXIMUM CUTTING DEPTH 100 mm (3.9")
POWER SOURCE Gas
*Dry weight includes water attachment and guard. Shown with optional STIHL diamond wheel.
HOW TO PURCHASE STIHL OUTDOOR POWER EQUIPMENT
Purchasing STIHL Outdoor Power Equipment from Gilford Hardware & Outdoor Power Equipment is easy, we have two options:
We're Located in Beautiful Gilford New Hampshire A Sales Tax FREE state, very close to Lake Winnipesaukee! Make a day out of it and experience the outdoors while saving money on your next Outdoor Power Equipment Purchase!
STIHL is the #1 selling brand of Outdoor Power Equipment world wide. It's because of their attention to quality. STIHL cannot be purchased online or sold at the big box stores. Stop by Gilford Hardware & Outdoor Power Equipment today!
Parts & Service
All STIHL Power Equipment Products come with a manufactures warranty. Don't sweat knowing that your new product isn't covered. Gilford Hardware can service your STIHL power equipment. We also carry and sell replacement parts.
STIHL has been manufacturing Outdoor Power Equipment Since 1926. It's had years of experience engineering and manufacturing the highest quality equipment. When you purchase a STIHL product you know it's been designed with the user in mind.